Panasonic HD3700H operating instructions ∑ Fade function

Page 65

AUDIO OUT SET UP menu

Adjusting the audio output signals in relation to the video signals

(1)Press the F1 (A/V PHASE) key to put the display in reverse video.

A/V PHASE

UNITY

(2)Adjust the phase difference using the ADJUST control.

When the ADJUST control is turned, the display changes to VAR.

(The adjustment can now be varied in 1-sample increments from i16 to j96 samples.)

ADJUST

i4

A/V PHASE

VAR

SAMPLES

(3) Upon completion of the adjustment, press the F1 (A/V PHASE) key.

When the UNITY/VAR key is pressed during the adjustment, the UNITY mode is restored. When the key is pressed again, the mode reverts to VAR.

UNITY

/VAR

Fade function

During editing, the cut-edited data is recorded automatically; during playback, this data is de- tected and the section concerned is V-faded.

Playback V-fade function OFF

Audio signal (A)

Audio signal (B)

 

 

:

Noise appears at the joins in the editing.

Playback V-fade function ON

Audio signal (A)

Audio signal (B)

:

V-fading is performed for an instant to eliminate the noise.

– 65 –

Image 65
Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the power∑ Display lamps Home menu displaysCH1 AES CH1 SERDual HD FreeSD Free ∑ Remaining tape time ∑ Setting mode display area∑ User file display ∑ Time code displays00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuFRAME11 FieldFine CoarsePreroll After pressing the F11 key, turn the Adjust controlF12 Still F13 Stby OFF∑ Reference Press the ENT key. The setting is now enteredCenter cursor key Cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuRamp INT SGMULT-BST BlackVideo OUT HD menu Convert F3 PRBLACK.L This menu is displayed by pressing the following keys Video OUT HD SET UP menuLine Conv Serial SYS PhaseInterp OFFEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menuVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP SDI menu Transfers the VTR to the Video OUT SD SET UP CompositeCmpst Menu screenVideo OUT SD SET UP Composite menu SYS SC Comb FIL1SYS H Line BLK2Through The E-E through mode AV minimum delay mode Video OUT SD SET UP Cmpst State menuOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu FINE/COARSE With the 480/59.94p format1 Adjustment can be made fromWith the 480/59.94i format With the 576/50i format1ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF Line BLKMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtosd Video OUT Convert menuSdtohd HdtohdFitv Video OUT Convert Hdtosd menuFith Standard Wide NarrowSelects the frequency bandwidth of the up-converter output Video OUT Convert Sdtohd menuConverter Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu CH-MIX CUEPCM Audio in PCM Input Select menu Digital AnalogDigital CH6 Selection is made in line with the CH5 setting using Selects the signals of the analog CH2 inputF10 CH-6 ANA CH2Audio in CUE Input Select menu No mixing Mixes the playback signalsTape This menu is displayed by pressing the following keys Audio Audio in SET UP menuFr in increments of 1/10th of a frame ∑ Switching the audio level meter scaleTone Select Audio in CH-MIX Select menuCH-MIX on CH-MIX OFF∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu Moni ShtlVAR ADDAudio OUT SET UP menu JOG Proc F1 A/V PhaseVAR Proc PB FadeData The style is set to the data mode compressed audio PCM The style is set to the normal PCM audio modeTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4TC/CHR menu EXT LTC INTLTC VTCIntense TC.STTC.UB ∑ Changing the superimposing position Time code displays CTL1 Control signal∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings