Panasonic HD3700H operating instructions ∑ Mix-and-record

Page 56

AUDIO IN CH-MIX SELECT menu

∑Mix-and-record

(1)Press the F6 (CH-MIX) key to set it ON. The mixing graph display now appears.

(2)Press the center cursor key to display the cursor.

Center cursor key

Cursor key

(3) Use the cursor keys to move the cursor to the channel in which the sound is to be mixed.

(4) Press the center cursor key to select the signals to be mixed.

The desired signals can be set on a channel by channel basis. The following signals can be set:

CH-1S CH-2S CH-3S CH-4S CH-5S CH-6S CH-7S CH-8S (input signals of each channel)

CH-1T CH-2T CH-3T CH-4T CH-5T CH-6T CH-7T CH-8T (play- back signals of each channel)

OFF (no mixing)

≥The same signal cannot be selected for one channel.

– 56 –

Image 56

Contents Operating Instructions SoftwareContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turning on the power Turn on the power Home menu is displayedHome menu displays ∑ Display lampsCH1 AES CH1 SERDual HD FreeSD Free ∑ Setting mode display area ∑ Remaining tape time∑ User file display ∑ Time code displays∑ Setting the initial value for the time code 00 00 00∑ Setting and checking the cue time Press the 4 cursor key Cue time now appears in reverse videoHome menu This menu is displayed by pressing the following key HomeKey Key designation Description Free ALL∑ Pre-read editing SD SDI SD SDI OUTHome SET UP menu This menu is displayed by pressing the following keys HomeField FRAME11Fine CoarseAfter pressing the F11 key, turn the Adjust control PrerollF12 Still F13 Stby OFFPress the ENT key. The setting is now entered ∑ ReferenceCenter cursor key Cursor key∑ Programmed play function Video in menu This menu is displayed by pressing the following keyINT SG RampMULT-BST BlackVideo OUT HD menu Convert F3 PRBLACK.L Video OUT HD SET UP menu This menu is displayed by pressing the following keysSerial SYS Phase Line ConvInterp OFFVideo OUT HD SET UP State menu EemodeVideo OUT SET UP State menu ∑ Selecting the TAPE/EE output signalsVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP Composite Transfers the VTR to the Video OUT SD SET UP SDI menuCmpst Menu screenVideo OUT SD SET UP Composite menu Comb FIL1 SYS SCSYS H Line BLK2Video OUT SD SET UP Cmpst State menu Through The E-E through mode AV minimum delay modeOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 480/59.94p format1 Adjustment can be made from FINE/COARSEWith the 480/59.94i format With the 576/50i format1Video OUT SET UP Line BLK video output line blanking menu ALL onALL OFF Line BLK∑ Setting the line blanking Move the cursor and select the lines to be blankedVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Video OUT Convert menu HdtosdSdtohd HdtohdVideo OUT Convert Hdtosd menu FitvFith Standard Wide NarrowSelects the frequency bandwidth of the up-converter output Video OUT Convert Sdtohd menuConverter Controls the enhancement adjustment of the converter output Video OUT Convert Hdtohd menuAudio in menu CH-MIX CUEPCM Audio in PCM Input Select menu Digital AnalogDigital Selects the signals of the analog CH2 input CH6 Selection is made in line with the CH5 setting usingF10 CH-6 ANA CH2Audio in CUE Input Select menu No mixing Mixes the playback signalsTape Audio in SET UP menu This menu is displayed by pressing the following keys AudioFr in increments of 1/10th of a frame ∑ Switching the audio level meter scaleTone Audio in CH-MIX Select menu SelectCH-MIX on CH-MIX OFF∑ Mix-and-record Sound output based on VTR’s mode and F6, F7 key statuses ONotesNAudio OUT menu Monitor SDI AsignAudio OUT Monitor menu Shtl MoniVAR ADDAudio OUT SET UP menu F1 A/V Phase JOG ProcVAR Proc PB FadePCM The style is set to the normal PCM audio mode Data The style is set to the data mode compressed audioTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function Audio OUT SET UP State menu F3-F7Video OUT SET UP State menu Audio OUT SDI Asign menu CH1T4 SdtosdTC/CHR menu INT EXT LTCLTC VTCIntense TC.STTC.UB Time code displays CTL1 Control signal ∑ Changing the superimposing position∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings