Panasonic HD3700H operating instructions Tc.St, Tc.Ub, Intense

Page 72

TC/CHR menu

Key	Key designation		Description
F6	CF BIT°1	ON: CF BIT is recoorded.
	For selecting the color	OFF: CF BIT is not recorded.
	frame bit ON/OFF during	≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,
	recording.	the VTR conforms to the external color frame bit.
F7	——

F8	SETUP	Transfers the VTR to the TC/CHR SET UP menu screen.

F9	CONVERT°2	Transfers the VTR to the TC/CHR CONVERT menu screen.
F10	TCR	LTC: LTC is read out all the time.
	For selecting time code	AUTO: At low speed, VITC is read preferentially. When it is not
	read out mode.	read, then LTC is read.
		VITC: VITC is read out all the time.
		≥In either setting, when the time code cannot be read, values
		corrected by control signal are read out. (Interpolation mode is
		assumed and [INTRP] is displayed on the HOME menu.)

F11	SUPER	TC:	Only the TC is superimposed.
	For setting superimpose.	TC.ST:	The TC and VTR status are superimposed.
		TC.UB:	The TC and user bits are superimposed.
		TC.ST.RT: The TC, VTR status and remaining tape time are
			superimposed.
		OFF:	No superimposed display.

F12	SUPER ERR	ON: The warning displays are superimposed.
		OFF: The warning displays are not superimposed.
F13	CHR TYPE	REVERSE: Characters appear against a black background.
	For selecting type of	INTENSE:	Characters are displayed more intensely.
	character to be
	superimosed.

°1This is displayed only when the 480/59.94i system format has been selected.

°2This is displayed only when the 1080/23p, 1080/24p or 1080/50i system format has been selected.

– 72 –

Image 72

Contents Operating Instructions SoftwareContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turning on the power Turn on the power Home menu is displayedHome menu displays ∑ Display lampsCH1 AES CH1 SERHD Free SD FreeDual ∑ Setting mode display area ∑ Remaining tape time∑ User file display ∑ Time code displays∑ Setting the initial value for the time code 00 00 00∑ Setting and checking the cue time Press the 4 cursor key Cue time now appears in reverse videoHome menu This menu is displayed by pressing the following key HomeKey Key designation Description Free ALL∑ Pre-read editing SD SDI SD SDI OUTHome SET UP menu This menu is displayed by pressing the following keys HomeField FRAME11Fine CoarseAfter pressing the F11 key, turn the Adjust control PrerollF12 Still F13 Stby OFFPress the ENT key. The setting is now entered ∑ ReferenceCenter cursor key Cursor key∑ Programmed play function Video in menu This menu is displayed by pressing the following keyINT SG RampMULT-BST BlackVideo OUT HD menu F3 PR BLACK.LConvert Video OUT HD SET UP menu This menu is displayed by pressing the following keysSerial SYS Phase Line ConvInterp OFFVideo OUT HD SET UP State menu EemodeVideo OUT SET UP State menu ∑ Selecting the TAPE/EE output signalsVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP Composite Transfers the VTR to the Video OUT SD SET UP SDI menuCmpst Menu screenVideo OUT SD SET UP Composite menu Comb FIL1 SYS SCSYS H Line BLK2Video OUT SD SET UP Cmpst State menu Through The E-E through mode AV minimum delay modeOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 480/59.94p format1 Adjustment can be made from FINE/COARSEWith the 480/59.94i format With the 576/50i format1Video OUT SET UP Line BLK video output line blanking menu ALL onALL OFF Line BLK∑ Setting the line blanking Move the cursor and select the lines to be blankedVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Video OUT Convert menu HdtosdSdtohd HdtohdVideo OUT Convert Hdtosd menu FitvFith Standard Wide NarrowVideo OUT Convert Sdtohd menu ConverterSelects the frequency bandwidth of the up-converter output Controls the enhancement adjustment of the converter output Video OUT Convert Hdtohd menuAudio in menu CUE PCMCH-MIX Audio in PCM Input Select menu Analog DigitalDigital Selects the signals of the analog CH2 input CH6 Selection is made in line with the CH5 setting usingF10 CH-6 ANA CH2Audio in CUE Input Select menu Mixes the playback signals TapeNo mixing Audio in SET UP menu This menu is displayed by pressing the following keys Audio∑ Switching the audio level meter scale ToneFr in increments of 1/10th of a frame Audio in CH-MIX Select menu SelectCH-MIX on CH-MIX OFF∑ Mix-and-record Sound output based on VTR’s mode and F6, F7 key statuses ONotesNAudio OUT menu Monitor SDI AsignAudio OUT Monitor menu Shtl MoniVAR ADDAudio OUT SET UP menu F1 A/V Phase JOG ProcVAR Proc PB FadePCM The style is set to the normal PCM audio mode Data The style is set to the data mode compressed audioTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function Audio OUT SET UP State menu F3-F7Video OUT SET UP State menu Audio OUT SDI Asign menu CH1T4 SdtosdTC/CHR menu INT EXT LTCLTC VTCTC.ST TC.UBIntense Time code displays CTL1 Control signal ∑ Changing the superimposing position∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings