Panasonic HD3700H Preroll, After pressing the F11 key, turn the Adjust control, F12 Still

Page 19

HOME SET UP menu

Key

Key designation

Description

F9–F10

——

 

 

 

 

F11

PREROLL

After pressing the F11 key, turn the ADJUST control.

 

For selecting the preroll

Selection can be made between 0 and 30 seconds.

 

time.

 

F12 STILL

For setting the STOP/STILL (static frame) mode holding time.

Sets the stop/still (still picture) mode holding time.

In order to protect the tape, the VTR is automatically transferred to the tape tension release mode (loosing) after a specific time has elapsed. This specific time can be set.

After pressing the F12 key, turn the ADJUST control.

1 sec, 3 sec, 30 sec, 1 min, 3 min or 5 min can be set as the holding time.

F13 STBY OFF

For setting the time for the transfer to standbay OFF.

For setting the time for the transfer from tape loosing to standby OFF.

After pressing the F13 key, turn the ADJUST control.

1 sec, 3 sec, 30 sec, 1 min, 3 min, 16 min and [Infinity: No transfer to standby OFF mode (drum stop/half loading)] can be set.

– 19 –

Image 19
Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the powerCH1 SER Home menu displays∑ Display lamps CH1 AESSD Free HD FreeDual ∑ Time code displays ∑ Setting mode display area∑ Remaining tape time ∑ User file display00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuCoarse FieldFRAME11 FineF13 Stby OFF After pressing the F11 key, turn the Adjust controlPreroll F12 StillCursor key Press the ENT key. The setting is now entered∑ Reference Center cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuBlack INT SGRamp MULT-BSTVideo OUT HD menu BLACK.L F3 PRConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menuOFF Serial SYS PhaseLine Conv InterpEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menuVideo OUT SD menu Menu screen Transfers the VTR to the Video OUT SD SET UP CompositeTransfers the VTR to the Video OUT SD SET UP SDI menu CmpstVideo OUT SD SET UP Composite menu Line BLK2 Comb FIL1SYS SC SYS HIs established Video OUT SD SET UP Cmpst State menuThrough The E-E through mode AV minimum delay mode Or Audio OUT F8 F12∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 576/50i format1 With the 480/59.94p format1 Adjustment can be made fromFINE/COARSE With the 480/59.94i formatLine BLK Video OUT SET UP Line BLK video output line blanking menuALL on ALL OFFMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtohd Video OUT Convert menuHdtosd SdtohdStandard Wide Narrow Video OUT Convert Hdtosd menuFitv FithConverter Video OUT Convert Sdtohd menuSelects the frequency bandwidth of the up-converter output Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu PCM CUECH-MIX Audio in PCM Input Select menu Digital AnalogDigital ANA CH2 Selects the signals of the analog CH2 inputCH6 Selection is made in line with the CH5 setting using F10 CH-6Audio in CUE Input Select menu Tape Mixes the playback signalsNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menuTone ∑ Switching the audio level meter scaleFr in increments of 1/10th of a frame CH-MIX OFF Audio in CH-MIX Select menuSelect CH-MIX on∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu ADD ShtlMoni VARAudio OUT SET UP menu PB Fade F1 A/V PhaseJOG Proc VAR ProcDolby-E PCM The style is set to the normal PCM audio modeData The style is set to the data mode compressed audio Transfers the VTR to the Audio OUT SET UP State menu∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4TC/CHR menu VTC INTEXT LTC LTCTC.UB TC.STIntense TCG Time code displays CTL1 Control signal∑ Changing the superimposing position ∑ Time code displays and VTR’s operating modes∑ Error information displays Table of user bit settings