Panasonic HD3700H F1 A/V Phase, JOG Proc, VAR Proc, PB Fade, Pb Out, Data ADV

AUDIO OUT SET UP menu

Key Key designation Description

F1 A/V PHASE°

For adjusting the audio output phase in relation to the video phase.

When digital signals output from the unit are processed by an external unit, a phase difference between video and audio signals can be produced. Such differences can be eliminated by adjusting the audio and video signal phases.

≥Refer to “Adjusting the audio output signals in relation to the video signals.”

F2	JOG PROC	Selects the digital processing in the JOG mode.
	For setting the digital	ON: Performs PCM audio digital processing.
	process ON/OFF.	OFF: No PCM audio digital processing.
F3	VAR PROC	Selects the digital processing in the VAR mode.
	For setting the digital	ON: Performs PCM audio digital processing.
	process ON/OFF.	OFF: No PCM audio digital processing.
F4	PB FADE	Uses V-fade to instantaneously eliminate the audio noise
	Playback fade.	occurring during playback at the cut edit points.
		ON: Activates the playback V-fade processing at all cut edit
		points on the tape.
		OFF: No playback V-fade processing.
F5	PB OUT	When shifting from stop to play status, some time elapses before
	Selects the audio output	the audio signals are output. This time lapse can be shortened.
	when playback is started.	INSTANT: Shortens the time lapse before audio is output. The
		first part of the audio signal to be output, however,
		produces an incomplete sound.
		Use for transmission purposes is not recommended.
		Convenient when used for search operations, for
		instance, because the audio signals can be checked
		quickly.
		DELAYED: Outputs the audio signals as soon as they are
		complete.
F6	PEAK HOLD	For holding the peak recording and playback levels.
	For setting the peak hold	ON: Peak level is held.
	of the level meter.	OFF: Peak level is not held.
F7	SCALE	For switching the scale of the audio level meter on display to
	For switching the level	standard scale or fine scale.
	meter scale.	FINE: Scale in 0.2 dB increments. (j24dB to j15dB)
		FULL: Standard scale. (j¶ to j0dB)
		Refer to “Switching the level meter scale” in the AUDIO IN SET
		UP menu section (on page 54).
F8	EXIT	Returns the VTR to the AUDIO OUT menu screen.
F9	DATA ADV°	0–1 Fr (in increments of 1/10th of a frame):
		The amount by which the data is to be advanced when the
		digital audio input/output format is in the data mode is
		adjusted. (When “0” is set, the amount is set to the default
		setting inside the VTR.)

°This item does not function when the E-E through mode (refer to the description of the F2 key on the AUDIO OUT

SET UP STATE menu) has been set.

– 63 –