Panasonic HD3700H operating instructions Shtl, Moni, Var, Add

AUDIO OUT MONITOR menu

Key	Key designation		Description
F1	MODE	Selects the VTR mode in which the monitor output signals are
	For selecting the mode.	automatically switched to the cue signals.
		SHTL:	Automatically outputs the playback signals of the
			cue channel in the SHTL, FF or REW mode.
			Outputs the signals of the channel selected by the
			L and R buttons in any other mode.
		VAR/SHTL: Automatically outputs the playback signals of the cue
			channel in the SHTL, FF, REW, JOG or VAR mode.
F2	L CH	Outputs the signals of the channel selected by the L and R
		buttons in any other mode.
		Selects whether the auto mode is to be activated for the left
		channel.
		OFF: Always outputs the channel signals selected by the L
		button.
		ON: Automatically outputs the cue signals in accordance with
		the mode selected by F1.
F3	R CH	Selects whether the auto mode is to be activated for the right
		channel.
		OFF: Always outputs the channel signals selected by the R
		button.
		ON: Automatically outputs the cue signals in accordance with
		the mode selected by F1.
F4–F6	——
F7	A.MONI	Selects whether to adjust the audio monitor output level using
	For selecting the audio	the headphones volume control on the front panel.
	monitor output level	UNITY: The audio monitor output level is forcibly fixed at the
	adjustment.		UNITY value.
		VAR:	The level can be adjusted using the headphones
			volume control.
F8	EXIT	Returns the VTR to the AUDIO OUT menu screen.
F9–F10	——
F11	R CH	For setting whether the signals from the left and right channels
F12	L CH	are to be mixed and output to the MONITOR connector.
		OFF: The signals are not mixed.
		ON: The signals are mixed.
F13	MODE	For selecting the way in which the channel signals output to the
		MONITOR connector are to be mixed.
		ADD:	Simple addition
		AVERAGE: Simple averaging

CUE OUT SELECT

This is used to select the main line CH1 through CH4 (8) signals serving as the CUE output. When the center cursor key is pressed, CUE OUT SELECT is highlighted, enabling the setting to be selected. (If MONITOR MIX is highlighted, press the F key and a cursor key (2 or 1) together to enable this setting to be selected.)

Select the channel using the cursor keys (2, 1, 3 and 4), and press the center cursor key to turn the selection ON or OFF.

MONITOR MIX

This is used to select the mixed left and right channel signals to be output to the MONITOR connector. As the selection condition, not more than two channels (maximum 4 channels) among CH1 through CH4 and among CH5 through CH8 can be set to serve as the left or right channel. When the center cursor key is pressed, MONITOR MIX is highlighted, enabling the setting to be selected. (If CUE OUT SELECT is highlighted, press the F key and a cursor key (2 or 1) together to enable this setting to be selected.)

Select the channel using the cursor keys (2, 1, 3 and 4), and press the center cursor key to turn the selection ON or OFF. (This setting is for selecting the channels; whether or not the selected signals are to be actually set is performed by switching between the F11 and F12 keys.)

– 61 –