Panasonic HD3700H F10 CH-6, ANA CH2, Selects the signals of the analog CH2 input

Page 50

AUDIO IN PCM INPUT SELECT menu

Key

Key designation

 

Description

F10

CH-6

ANA CH2:

Selects the signals of the analog CH2 input

 

For selecting the recording

 

connector.

 

signals of digital audio

DIGITAL:

Selects the digital audio input signals (AES/SDI

 

CH6.

 

selection is made in line with the CH5 setting using

 

 

 

F7).

 

 

INT SG:

Selects the internal generator signals.

F11

DIGITAL

AES:

Selects the AES digital audio input signals.

 

For selecting the CH7 and SERIAL: Selects the serial input signals.

 

CH8 digital input signals.

 

 

 

 

 

F12

CH-7

ANA CH3: Selects the signals of the analog CH3 input

 

For selecting the recording

 

connector.

 

signals of digital audio

DIGITAL:

Selects the digital audio input signals (AES/SDI

 

CH7.

 

selection is made in line with the CH8 setting using

 

 

 

F11).

 

 

INT SG:

Selects the internal generator signals.

 

 

 

F13

CH-8

ANA CH4: Selects the signals of the analog CH4 input

 

For selecting the recording

 

connector.

 

signals of digital audio

DIGITAL:

Selects the digital audio input signals (AES/SDI

 

CH8.

 

selection is made in line with the CH7 setting using

 

 

 

F11).

 

 

INT SG:

Selects the internal generator signals.

– 50 –

Image 50
Contents Operating Instructions SoftwareContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turning on the power Turn on the power Home menu is displayedCH1 AES Home menu displays∑ Display lamps CH1 SERDual HD FreeSD Free ∑ User file display ∑ Setting mode display area∑ Remaining tape time ∑ Time code displays∑ Setting the initial value for the time code 00 00 00∑ Setting and checking the cue time Press the 4 cursor key Cue time now appears in reverse videoHome menu This menu is displayed by pressing the following key HomeKey Key designation Description Free ALL∑ Pre-read editing SD SDI SD SDI OUTHome SET UP menu This menu is displayed by pressing the following keys HomeFine FieldFRAME11 CoarseF12 Still After pressing the F11 key, turn the Adjust controlPreroll F13 Stby OFFCenter cursor key Press the ENT key. The setting is now entered∑ Reference Cursor key∑ Programmed play function Video in menu This menu is displayed by pressing the following keyMULT-BST INT SGRamp BlackVideo OUT HD menu Convert F3 PRBLACK.L Video OUT HD SET UP menu This menu is displayed by pressing the following keysInterp Serial SYS PhaseLine Conv OFFVideo OUT HD SET UP State menu EemodeVideo OUT SET UP State menu ∑ Selecting the TAPE/EE output signalsVideo OUT SD menu Cmpst Transfers the VTR to the Video OUT SD SET UP CompositeTransfers the VTR to the Video OUT SD SET UP SDI menu Menu screenVideo OUT SD SET UP Composite menu SYS H Comb FIL1SYS SC Line BLK2Or Audio OUT F8 F12 Video OUT SD SET UP Cmpst State menuThrough The E-E through mode AV minimum delay mode Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 480/59.94i format With the 480/59.94p format1 Adjustment can be made fromFINE/COARSE With the 576/50i format1ALL OFF Video OUT SET UP Line BLK video output line blanking menuALL on Line BLK∑ Setting the line blanking Move the cursor and select the lines to be blankedVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Sdtohd Video OUT Convert menuHdtosd HdtohdFith Video OUT Convert Hdtosd menuFitv Standard Wide NarrowSelects the frequency bandwidth of the up-converter output Video OUT Convert Sdtohd menuConverter Controls the enhancement adjustment of the converter output Video OUT Convert Hdtohd menuAudio in menu CH-MIX CUEPCM Audio in PCM Input Select menu Digital AnalogDigital F10 CH-6 Selects the signals of the analog CH2 inputCH6 Selection is made in line with the CH5 setting using ANA CH2Audio in CUE Input Select menu No mixing Mixes the playback signalsTape Audio in SET UP menu This menu is displayed by pressing the following keys AudioFr in increments of 1/10th of a frame ∑ Switching the audio level meter scaleTone CH-MIX on Audio in CH-MIX Select menuSelect CH-MIX OFF∑ Mix-and-record Sound output based on VTR’s mode and F6, F7 key statuses ONotesNAudio OUT menu Monitor SDI AsignAudio OUT Monitor menu VAR ShtlMoni ADDAudio OUT SET UP menu VAR Proc F1 A/V PhaseJOG Proc PB FadeTransfers the VTR to the Audio OUT SET UP State menu PCM The style is set to the normal PCM audio modeData The style is set to the data mode compressed audio Dolby-E∑ Fade function Audio OUT SET UP State menu F3-F7Video OUT SET UP State menu Audio OUT SDI Asign menu CH1T4 SdtosdTC/CHR menu LTC INTEXT LTC VTCIntense TC.STTC.UB ∑ Time code displays and VTR’s operating modes Time code displays CTL1 Control signal∑ Changing the superimposing position TCG∑ Error information displays Table of user bit settings