Panasonic HD3700H operating instructions Table of user bit settings

TC/CHR menu

Table of user bit settings

F1 (SOURCE)	F2 (TC SLAVE)	F3 (UB SLAVE)	F10 (TCR)	LUBG mode
			LTC	REGEN
		ON	AUTO
INT (internal) TC	——		VITC	INT UB
			LTC	PRESET
		OFF	AUTO
			VITC	INT UB
			LTC	EXT REGEN
S LTC	——	ON	AUTO
S VITC
			VITC	INT UB
			LTC	PRESET
EXT LTC	SLAVE	OFF	AUTO
			VITC	INT UB
			LTC
		ON	AUTO
EXT LTC	DIRECT		VITC	DIRECT
			LTC
		OFF	AUDIO
			VITC

°The user bit can be set in all modes except for recording.

VUBG mode

INT UB

REGEN

INT UB

PRESET

INT UB

EXT REGEN

INT UB

PRESET

INT UB

EXT REGEN

INT UB

PRESET°

DIRECT: The external LTC input signal is recorded directly and output. It is not synchronized with the internal reference signal.

REGEN: The user bit is slave-locked to the value read out on the tape. The user bit cannot be set.

EXT REGEN: The user bit is slave-locked to the externally input VITC or LTC. The user bit cannot be set.

PRESET: The user bit is not locked to the value read out on the tape or external input. The user bit can be set.

INT UB: In this mode, the previous user bit is retained, and neither the REGEN nor PRESET functions can be implemented.

To set the user bit again, use the F1 (SOURCE), F2 (TC SLAVE) or F3 (UB SLAVE) key to select one of the three modes above.

– 75 –