Panasonic HD3700H operating instructions HD Free, SD Free, Dual

Page 9

HOME menu displays

REF: This indicates the status of the output reference signal which has been selected by the VTR.

HD REF59: HD REF with a field frequency of 59.94 Hz is selected.

HD REF47: HD REF with a field frequency of 47.96 Hz is selected.

HD REF48: HD REF with a field frequency of 48.00 Hz is selected.

HD REF50: HD REF with a field frequency of 50.00 Hz is selected.

SD REF59: The NTSC signal is selected as the SD REF signal.

SD REF50: The PAL signal is selected as the SD REF sig- nal.

HD IN59:	The HD serial input with a frame frequency of
	29.97 Hz is selected as the REF signal.
HD IN47:	The HD serial input with a frame frequency of
	23.98 Hz is selected as the REF signal.
HD IN48:	The HD serial input with a frame frequency of
	24.00 Hz is selected as the REF signal.
HD IN50:	The HD serial input with a frame frequency of
	25.00 Hz is selected.
SD IN:	The SD serial input is selected as the REF sig-
	nal. (SD IN can be selected only when 525i has
	been selected as the VTR’s system format.)
HD FREE:	The HD internal signal generator is used since
	no REF signal has been selected using the
	OUT REF setting.
SD FREE:	The SD internal signal generator is used since
	no REF signal has been selected using the
	OUT REF setting.
*DUAL:	HD REF47 and SD REF59 have been selected
	simultaneously.
	This setting takes effect when 1080/23psf has
	been selected as the VTR’s system format,
	AUTO has been selected by the OUT REF set-
	ting, and two of the above REF signals have
	been input.
	°This VTR uses the HD REF and SD REF sig-
	nals as a reference for entering the 24 # 60
	conversion inside the unit.

– 9 –

Image 9

Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the power∑ Display lamps Home menu displaysCH1 AES CH1 SERHD Free SD FreeDual ∑ Remaining tape time ∑ Setting mode display area∑ User file display ∑ Time code displays00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuFRAME11 FieldFine CoarsePreroll After pressing the F11 key, turn the Adjust controlF12 Still F13 Stby OFF∑ Reference Press the ENT key. The setting is now enteredCenter cursor key Cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuRamp INT SGMULT-BST BlackVideo OUT HD menu F3 PR BLACK.LConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menuLine Conv Serial SYS PhaseInterp OFFEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menuVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP SDI menu Transfers the VTR to the Video OUT SD SET UP CompositeCmpst Menu screenVideo OUT SD SET UP Composite menu SYS SC Comb FIL1SYS H Line BLK2Through The E-E through mode AV minimum delay mode Video OUT SD SET UP Cmpst State menuOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu FINE/COARSE With the 480/59.94p format1 Adjustment can be made fromWith the 480/59.94i format With the 576/50i format1ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF Line BLKMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtosd Video OUT Convert menuSdtohd HdtohdFitv Video OUT Convert Hdtosd menuFith Standard Wide NarrowVideo OUT Convert Sdtohd menu ConverterSelects the frequency bandwidth of the up-converter output Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu CUE PCMCH-MIX Audio in PCM Input Select menu Analog DigitalDigital CH6 Selection is made in line with the CH5 setting using Selects the signals of the analog CH2 inputF10 CH-6 ANA CH2Audio in CUE Input Select menu Mixes the playback signals TapeNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menu∑ Switching the audio level meter scale ToneFr in increments of 1/10th of a frame Select Audio in CH-MIX Select menuCH-MIX on CH-MIX OFF∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu Moni ShtlVAR ADDAudio OUT SET UP menu JOG Proc F1 A/V PhaseVAR Proc PB FadeData The style is set to the data mode compressed audio PCM The style is set to the normal PCM audio modeTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4TC/CHR menu EXT LTC INTLTC VTCTC.ST TC.UBIntense ∑ Changing the superimposing position Time code displays CTL1 Control signal∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings