Panasonic HD3700H operating instructions Comb FIL1, Sys Sc, Sys H, Line BLK2

Page 33

VIDEO OUT SD SET UP COMPOSITE menu

Key	Key designation	Description
F1	COMB FIL°1	Selects whether the analog composite output signals are to be
	For controlling the comb	passed through the comb filter.
	filter.	ON: The signals are passed through the filter and output.
		OFF: The signals are not passed through the filter.
F2–F4	——

F5	SYS SC	Adjusts the system subcarrier of the composite output.
	For adjusting the system	When this key is pressed together with the F key, the white-on-
	subcarrier.	black display (VAR MODE) is established, and the system
		subcarrier can be adjusted using the ADJUST control.

F6	SYS H
	For adjusting the system H
	phase.

Adjusts the system H phase of the composite output. Adjusts the system H phase of the composite output.

When this key is pressed together with the F key, the white-on- black display (VAR MODE) is established, and the system H phase can be adjusted using the ADJUST control.

The system H phase is adjusted in sample increments. n0.5H j858 to i858 (with 480/59.94i format)

j864 to i864 (with 576/50i format)

F7	INTERP.	Initiates vertical interpolation during AT playback to reduce the
	Interpolation	vertical movement of the playback images.
		AUTO: Automatically initiates interpolation in the JOG or VAR
		mode.
		OFF: No interpolation.

F8	EXIT	Returns the VTR to the VIDEO OUT SD menu screen.

F9	——
F10	7.5%STUP	Selects whether to add 7.5% setup to the composite output.
	For adding 7.5% setup to	(This setting takes effect with NTSC output signals only; This
	the composite output.	setting is not displayed with PAL output signals.)
		ON: 7.5% setup is added.
		OFF: 7.5% setup is not added.

F11	LINE BLK°2	For transferring to the video output line blanking menu.
		NTSC: Lines 10 to 21.
		PAL: Lines 8 to 22.

F12	STATE	Transfers the VTR to the VIDEO OUT SD SET UP CMPST
		STATE menu screen.
F13	——

°1This item does not function in the 1080/50i mode.

°2In a mode other than the 525i (480/59i) mode, this adjustment is possible only when the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed.

– 33 –

Image 33

Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the power∑ Display lamps Home menu displaysCH1 AES CH1 SERHD Free SD FreeDual ∑ Remaining tape time ∑ Setting mode display area∑ User file display ∑ Time code displays00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuFRAME11 FieldFine CoarsePreroll After pressing the F11 key, turn the Adjust controlF12 Still F13 Stby OFF∑ Reference Press the ENT key. The setting is now enteredCenter cursor key Cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuRamp INT SGMULT-BST BlackVideo OUT HD menu F3 PR BLACK.LConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menuLine Conv Serial SYS PhaseInterp OFFEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menu Video OUT SD menu Transfers the VTR to the Video OUT SD SET UP SDI menu Transfers the VTR to the Video OUT SD SET UP CompositeCmpst Menu screenVideo OUT SD SET UP Composite menu SYS SC Comb FIL1SYS H Line BLK2Through The E-E through mode AV minimum delay mode Video OUT SD SET UP Cmpst State menuOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu FINE/COARSE With the 480/59.94p format1 Adjustment can be made fromWith the 480/59.94i format With the 576/50i format1ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF Line BLKMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtosd Video OUT Convert menuSdtohd HdtohdFitv Video OUT Convert Hdtosd menuFith Standard Wide NarrowVideo OUT Convert Sdtohd menu ConverterSelects the frequency bandwidth of the up-converter output Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu CUE PCMCH-MIX Audio in PCM Input Select menu Analog DigitalDigital CH6 Selection is made in line with the CH5 setting using Selects the signals of the analog CH2 inputF10 CH-6 ANA CH2Audio in CUE Input Select menu Mixes the playback signals TapeNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menu∑ Switching the audio level meter scale ToneFr in increments of 1/10th of a frame Select Audio in CH-MIX Select menuCH-MIX on CH-MIX OFF∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu Moni ShtlVAR ADDAudio OUT SET UP menu JOG Proc F1 A/V PhaseVAR Proc PB FadeData The style is set to the data mode compressed audio PCM The style is set to the normal PCM audio modeTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4TC/CHR menu EXT LTC INTLTC VTCTC.ST TC.UBIntense ∑ Changing the superimposing position Time code displays CTL1 Control signal∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings