Panasonic WV-CL930, WV-CL934 operating instructions Installations/Connections, Lens type Model No

Page 11

Installations/Connections

Caution:

ONLY CONNECT WV-CL934 TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.

Be sure to connect the grounding lead to the GND terminal.

zRotate the lens (option) clockwise slowly to mount the lens.

Important:

• For use of C-mount lens, use the C-mount adaptor (accessory).

 

ø20 mm {ø3/4"} or less

C-mount adaptor (accessory)

C mount: 4.5 mm {5/32"} or less

* Required for use of C-mount lens

CS mount: 4.5 mm {5/32"} or less

 

Optional dedicated lens

 

Lens type

Model No.

 

 

 

 

1/2-inch type {1/2"} variable

 

2 x varifocal

WV-LZ80/2

focal lens

 

 

 

 

 

 

 

 

1/2-inch type {1/2"} zoom lenses

6 x Motorized

WV-LZ81/6A

 

 

10 x Motorized

WV-LZ81/10

 

 

 

 

 

 

Note:

It is recommended to use a lens whose F number is F1.2 or greater.

When using a lens whose F number is smaller than F1.2, sharpness of image may be diminished.

11

Image 11
Contents WV-CL934 English Version Contents Important Safety Instructions Limitation of Liability Disclaimer of WarrantyNight monochrome image activation function equipped PrefaceIntroduction of near-infrared CCD Auto back focus function ABF equippedPrecautions Avoid connections during a lightning storm Avoid installing in the following locationsInstalling place Mounting screwsWV-CL934 Major Operating Controls and Their FunctionsWV-CL930/WV-CL934 WV-CL930External terminal 0Power connector only for WV-CL930 ALC lens connectorExternal synchronization switch Operation buttons Power indicatorLens type Model No Installations/ConnectionsALC lens connector ALC connector Locally procured Quantity Installation ApplicableWV-CL930 Connect the power cord and turn on the powerWV-CL934 Adjust the focusHow to use fixed focus lens Color/black-and-white input Setting of external synchronization switchExternal terminal Setup item Description Setup MenusSetup menu list Language Setup Step Basic operationChange of settings Selection of setting itemCamera title setting Camera ID Camera Operation Setup Camera SetupCharacter entry Backlight compensation Method of controlling quantity of light ALC/ELCCamera Setup screen Preset mode settingSensing area setting for backlight compensation Flare compensation mode Electronic shutter setting ShutterGain control setting AGC Electronic sensitivity enhancement setting Sens UP INT ↔ LL Synchronization setting SyncAdjustment of phase in power supply synchronization mode LL Adjustment of phase in VBS genlock mode VBS Adjustment of phase in VS genlock mode VS White balance setting White BAL Description about motion detector function MODE1 Motion detector function setting Motion DETManual fine adjustment of white balance Detection condition Demonstration modeDescription about motion detector function MODE2 Advanced settings about motion detector function MODE1 Step Camera Setup screen BW Mode screen Digital noise reduction function setting DNRImage resolution setting Resolution Settings in black-and-white mode BW ModeStep Mosaics the zone Privacy zone setting Privacy ZoneOFF default Displays the zone normally Grays the zoneImage horizontal flip Mirror Lens type setting LENS-DRIVEImage stabilizer setting Stabilizer Back focus adjustment Back focus setting BACK-FOCUS SetupABF Auto Pedestal level adjustment Pedestal Special Menu Setup Special SetupChroma level adjustment Chroma Gain Aperture level adjustment AP GainPIX OFF screen Pixel compensation Pixel compensation PIX OFFSerial number viewing SER.NO Communication configuration CommunicationDefault restoring Camera Reset Language Selection Language Setup Shortcut Operation BLC Preset OFFCause/solution TroubleshootingSymptom ALC/ALC+/ELC SpecificationsStandard Accessories Panasonic Canada Inc