Panasonic WV-CL930, WV-CL934 operating instructions Standard Accessories

Page 55

Ambient operating

 

temperature:

–10 °C to +50 °C {14°F to 122°F}

Ambient operating humidity: Less than 90 %

Dimensions:

WV-CL930: 70 (W) x 65 (H) x 151 (D) mm

 

{2-3/4" (W) x 2-9/16" (H) x 5-15/16" (D)}

 

(Connectors and terminals excluded)

 

WV-CL934: 70 (W) x 65 (H) x 151 (D) mm

 

{2-3/4" (W) x 2-9/16" (H) x 5-15/16" (D)}

 

(Connectors and terminals excluded)

Weight:

WV-CL930: 570 g {1.26 lbs} (Power cord excluded)

 

WV-CL934: 560 g {1.24 lbs}

Finish:

Black (Munsell 5.0 PB/2.9/0.3 or equivalent)

 

Gray (Munsell 4.4 G/4.0/0.1 or equivalent)

Weights ad dimensions indicated are approximate.

Specifications are subject to change without notice.

Standard Accessories

Operating Instructions (this book)

1 pc.

Warranty card

1 pc.

The following is for installation.

 

Power cord (WV-CL930 only)

1 pc.

ALC connector

1 pc.

C-mount adaptor

1 pc.

55

Image 55
Contents WV-CL934 English Version Contents Important Safety Instructions Limitation of Liability Disclaimer of WarrantyNight monochrome image activation function equipped PrefaceIntroduction of near-infrared CCD Auto back focus function ABF equippedPrecautions Avoid connections during a lightning storm Avoid installing in the following locationsInstalling place Mounting screwsWV-CL934 Major Operating Controls and Their FunctionsWV-CL930/WV-CL934 WV-CL930External terminal 0Power connector only for WV-CL930 ALC lens connectorExternal synchronization switch Operation buttons Power indicatorLens type Model No Installations/ConnectionsALC lens connector ALC connector Locally procured Quantity Installation ApplicableWV-CL930 Connect the power cord and turn on the powerWV-CL934 Adjust the focusHow to use fixed focus lens External terminal Setting of external synchronization switchColor/black-and-white input Setup menu list Setup MenusSetup item Description Language Setup Step Basic operationChange of settings Selection of setting itemCamera title setting Camera ID Camera Operation Setup Camera SetupCharacter entry Backlight compensation Method of controlling quantity of light ALC/ELCCamera Setup screen Preset mode settingSensing area setting for backlight compensation Flare compensation mode Electronic shutter setting ShutterGain control setting AGC Electronic sensitivity enhancement setting Sens UP INT ↔ LL Synchronization setting SyncAdjustment of phase in power supply synchronization mode LL Adjustment of phase in VBS genlock mode VBS Adjustment of phase in VS genlock mode VS White balance setting White BAL Manual fine adjustment of white balance Motion detector function setting Motion DETDescription about motion detector function MODE1 Description about motion detector function MODE2 Demonstration modeDetection condition Advanced settings about motion detector function MODE1 Step Camera Setup screen BW Mode screen Digital noise reduction function setting DNRImage resolution setting Resolution Settings in black-and-white mode BW ModeStep Mosaics the zone Privacy zone setting Privacy ZoneOFF default Displays the zone normally Grays the zoneImage horizontal flip Mirror Lens type setting LENS-DRIVEImage stabilizer setting Stabilizer Back focus adjustment Back focus setting BACK-FOCUS SetupABF Auto Pedestal level adjustment Pedestal Special Menu Setup Special SetupChroma level adjustment Chroma Gain Aperture level adjustment AP GainPIX OFF screen Pixel compensation Pixel compensation PIX OFFDefault restoring Camera Reset Communication configuration CommunicationSerial number viewing SER.NO Language Selection Language Setup Shortcut Operation BLC Preset OFFCause/solution TroubleshootingSymptom ALC/ALC+/ELC SpecificationsStandard Accessories Panasonic Canada Inc