Panasonic WV-CL930, WV-CL934 Back focus setting BACK-FOCUS Setup, Back focus adjustment

Back focus setting [BACK-FOCUS SETUP]

The back focus setting type is selected and fine adjustment is performed. The following setting is performed on the "BACK-FOCUS SETUP" screen through the top screen. Refer to pages 21 - 22 for how to call up the screen. The lens adjustment (☞ pages 16 - 17) shall be performed before the back focus adjustment.

<Back focus adjustment>

The back focus adjustment is performed by changing the distance between the lens and focal point.

Important:

•The auto back focus function is used for back focus adjustment at installation and for focus correction at switching between the color and black-and-white modes after installation. This function is not a function that is supposed to be operated continuously such as the auto focus function.

•When focus missing occurs due to secular change in the lens and installation environment or peripheral temperature change, the back focus adjustment is required again.

Note:

The back focus adjustment can be also performed through the operation buttons. (☞ page 9)

"BACK-FOCUS SETUP" screen

**BACK-FOCUS SETUP**

ABF			PUSH	SW
MANUAL-ADJ
C/L	B/W	AUTO
SETUP-SW LOCK OFF
NEAR				FAR

..................

Step 2

To fine adjust the back focus, move the cur- sor to "MANUAL-ADJ", press the setting but- ton, and use the right or left button to adjust the back focus manually.

INDICATOR XXXX

RET TOP END

Note:

"ABF" is available when "SENS UP" is set to "OFF", "X2 AUTO", or "X2 FIX".

Step 1

Notes:

•Pressing the right and left buttons simul- taneously resets the back focus position to the CS mount default position.

•The value of "INDICATOR" is a guide to adjust the back focus. The larger the value is, the sharper the image becomes.

Step 3

Move the cursor to "PUSH SW" of "ABF" and press the setting button.

→The auto back focus function provides back focus adjustment to automatically focus on a subject located in the center of the screen.

Move the cursor to "C/L ←→ B/W" and select the back focus adjustment type from the fol- lowing:

45