Panasonic WV-CL930, WV-CL934 operating instructions Gain control setting AGC

4. Gain control setting [AGC]

"CAMERA SETUP" screen

**CAMERA	SETUP** 1/2
CAMERA ID	OFF
ALC/ELC	ALC
SHUTTER	OFF
AGC	ON
SENS UP	OFF
SYNC	INT
WHITE BAL	ATW1
MOTION DET	OFF
DNR	HIGH
RESOLUTION	HIGH
BW MODE

"AGC MAX" screen

** AGC MAX **
LEVEL			128
	......
	-	+

RET TOP END

Step 1

Move the cursor to "AGC" and use right or left button to select "ON" or "OFF".

ON (default): Automatically increases the gain to make the screen brighter when the illuminance of the subject becomes darker. The maximum value is adjust- able.

OFF: Does not increase the gain. (The nor- mal image remains.)

Step 2

Move the cursor to "ON" and press the set- ting button to call up the "AGC MAX" screen.

Step 3

Move the cursor to "LEVEL". The cursor is reversely highlighted.

Move the cursor horizontally to adjust the gain with use of the right or left button.

Notes:

•Change in the level of "AGC MAX" caus- es change in the level of the input signal that enables electronic sensitivity enhancement when "SENS UP" is set to AUTO and also change in the level of the input signal that activates black-and- white mode.

•If noise is undesirable, adjust the level of "AGC MAX".

29