6. Synchronization setting [SYNC]
This unit supports the following 5 types of synchronization methods, and one of the following is selected.
The order of descriptions below indicates the order of priorities.
qMultiplexed vertical drive signal (VD2) w Power supply synchronization (LL)
* Synchronization is performed on the basis of the power supply frequency. e Composite color video signal or black burst signal (VBS)
r Monochrome composite video signal or composite synchronizing signal (VS) t Internal synchronization (INT) (default)
Input of a multiplexed vertical drive signal (VD2) automatically switches to the VD2 synchro- nization even if the camera is set to other than the VD2 synchronization method.
The set item displays are shown in the chart below with accordance with a synchronization sig- nal input.
Power supply | Synchronization signal input |
| Menu display | ||
|
|
| |||
frequency [Hz] | VD2 | VBS | VS | ||
| |||||
|
| ||||
|
|
|
|
| |
| – | b | X | VBS ↔ LL* | |
60 | – | X | b | VS ↔ LL* | |
| – | X | X | INT ↔ LL* | |
|
|
|
|
| |
*These items are switchable with use of the right or left button.
When LL, VBS, or VS is selected, power supply synchronizing phase, genlock horizontal phase, subcarrier phase, and others can be set up. (☞ pages 32 - 34)
Note:
When "INT" is selected, do not provide synchronization signals to the external synchroniz- ing input connector on the rear side of the camera.
31