Panasonic WV-CL934 Preface, Introduction of near-infrared CCD, Motion detector function equipped

Preface

This product is a 1/2-inch type {1/2"} CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitoring camera. The main features are described as follows:

Introduction of near-infrared CCD

This camera has the capacity to shoot pictures under the light source from the near-infrared light region to the visible light region.

Auto back focus function (ABF) equipped

Moving the CCD inside the camera to an optimal position with the operation button of this unit or the setup menu allows users to automatically adjust the back focus.

The back focus is adjustable with the setup menu through the system controller (option) even after installation of this unit.

The auto back focus function also allows users to correct out of focus when changing between color and black-and-white images.

High sensitivity achieved thanks to noise reduction function

As low as 0.09 lx (F1.4) has been accomplished for color images thanks to the introduction of low noise circuit design.

Night monochrome image activation function equipped

No setting change is required at night because images automatically changes from the color mode to the black-and-white mode at low illuminance.

Motion detector function equipped

If motion is observed in the monitor, the camera is covered with a cloth, a cap, or the like, or the camera direction is changed during monitoring, an alarm signal is provided.

Note:

The motion detector function is not exclusively used for prevention of theft, fire, etc. We are not responsible for any accidents or damages occurring in case.

6