Panasonic WV-CL930, WV-CL934 Camera Operation Setup Camera Setup, Camera title setting Camera ID

Camera Operation Setup [CAMERA SETUP]

The following describes the camera operation settings. The following settings are performed on the "CAMERA SETUP" screen through the top screen. Refer to page 21 for how to call up the screen.

	q	**CAMERA	SETUP** 1/2		**CAMERA	SETUP** 2/2
w		CAMERA ID	OFF	!2 PRIVACY ZONE		OFF
		ALC/ELC	ALC	!3	MIRROR	OFF
	e
r		SHUTTER	OFF	!4 LENS-DRIVE		DC
		AGC	ON	!5	STABILIZER	OFF
	t
y		SENS UP	OFF
		SYNC	INT
	u
i		WHITE BAL	ATW1
		MOTION DET	OFF
	o
		DNR	HIGH
!0		RESOLUTION	HIGH
	!1 BW MODE				RET TOP END

1. Camera title setting [CAMERA ID]

This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumeric characters and symbol, and displayed on the screen. The camera title is named with up to 16 characters. Follow the proce- dure below to specify the camera title.

"CAMERA SETUP" screen		Title creation screen			Display positioning screen
**CAMERA SETUP** 1/2			CAMERA ID
CAMERA ID	OFF		0	123456789	FLOOR	1
ALC/ELC	ALC			ABCDEFGHIJKLM
SHUTTER	OFF		NOPQRSTUVWXYZ
AGC	ON	().,'":;&#!?=
SENS UP	OFF	+-*/%$
SYNC	INT	SPACE POSI
WHITE BAL	ATW1
MOTION DET	OFF	RET TOP END RESET
DNR	HIGH	................
RESOLUTION	HIGH
BW MODE

Editing area

Step 1

Set "CAMERA ID" to "ON" and press the set- ting button.

→The title creation screen appears.

Step 2

Move the cursor to the target item with use of the up, down, right, and left buttons, and press the setting button to enter the charac- ter.

→The entered characters are displayed in the editing area.

23