15. Image stabilizer setting [STABILIZER]
"ON" or "OFF" is selected to decide whether or not to enable the image stabilizer.
This function is effective for the case that the camera is installed on a power pole or other poles.
ON: Enables the image stabilizer.
OFF (default): Disables the image stabilizer.
Important:
•When "ON" is selected for the image stabilizer, the view angle becomes narrower and the resolution becomes lower. When "ON" is selected for the image stabilizer, check the view angle and resolution at camera installation.
•The image stabilizer function may not work for the following subjects or conditions:
•Dark subject
•Less contrasty subject (e.g. white wall)
•Short cycled image shaking such as mechanical vibration
•Large amplitude image shaking
44