Panasonic WV-CL934, WV-CL930 operating instructions ABF Auto

AUTO (default): Adjusts the back focus function automatically and corrects out of focus when switching between color and black-and-white images.

PRESET: Performs the preset movement to each specified back focus position when switching between color and black-and-white images. The preset position is the back focus position specified last time, which was automatically memorized for each of color images and black-and-white images.

FIX: Fixes the position after adjusting the back focus either automatically (ABF) or manually.

Note:

"AUTO" of "C/L ←→ B/W" is available when "SENS UP" is set to "OFF", "X2 AUTO", or "X2 FIX".

Step 4

Moving the cursor to "SETUP-SW LOCK" and selecting "ON" allow users to disable the back focus adjustment with the operation buttons. (☞ page 17)

Important:

• The following are recommendation for back focus setting in accordance with subjects.

	For such case	Select this (recommendation)
	(subject conditions)	Back focus adjustment	"C/L ←→ B/W" switching
•	Normal subject	"ABF"	"AUTO"
•	Frequently moving subj.	Fine adjustment with "MANU-	"PRESET" or "FIX"
• Subj. with low illuminance		AL-ADJ" after "ABF" or "MANU-

•Too bright or reflective subj. AL-ADJ"

•Subj. through a window

•Place where the lens easily becomes dirty

•Subj. with less contrast such as white wall

•Subj. with remarkable depth

•Subj. with heavy flicker

•Subj. with horizontally paral- lel lines such as a shutter

•We shall not responsible for any inconvenience, loss, or damage caused by the settings or results of the back focus function.

46