Panasonic WV-CL934, WV-CL930 operating instructions Installation Applicable, Quantity

Installation	Applicable	Recommend-	Screw	Minimum pull-out
position	mounting base	ed screw	quantity	strength (per 1 screw)
On ceiling	WV-7011	M6	4 pieces	196 N {44 lbf}
	WV-7010	M8	3 pieces	196 N {44 lbf}
	WV-7012	M6	3 pieces	196 N {44 lbf}
On wall	WV-831	M8	4 pieces	921 N {207 lbf}
	WV-7013	M6	3 pieces	2.25 kN {505 lbf}

For some applicable mounting bases, "A" is attached to the model number. The mounting con- ditions are the same even for the A-attached models.

•When the tripod socket is mounted on the top of the camera, be sure to use the screws that were removed from the tri- pod socket. Use of longer or shorter screws may cause drop or damage. (Recommended tightening torque: 0.39 N·m {0.29 lbf·ft})

Screws

Tripod socket hole:	Tripod socket
1/4-20 UNC

vEstablish the connection of a coaxial cable (locally procured).

Important:

•Be sure to turn off the power of each device before connection.

Connect a coaxial cable (locally procured) to the video output connector. If the synchroniz- ing signal input is provided from an external device, connect another coaxial cable to the external synchronization input connector.

120V ~ 60Hz

GEN-LOCK VIDEO OUT

POWER

ALARM	GND
	OUT
DAY/	GND
NIGHT	IN

From external synchronization source (VBS/VS)

Coaxial cables (locally procured)

To video input (CAMERA IN)

(This illustration represents WV-CL930.)

Important:

• Be sure to secure the coaxial cable connectors.

14