Adjustment of phase in VS genlock mode (VS)
The adjusting video signal of the camera and the criterial external synchronizing input signal are connected to a
"CAMERA SETUP" screen
**CAMERA | SETUP** 1/2 | ||||||||
CAMERA ID | OFF |
|
|
| |||||
|
| ||||||||
ALC/ELC | ALC |
|
| ||||||
| |||||||||
| |||||||||
SHUTTER | OFF | ||||||||
AGC | ON |
|
| ||||||
| |||||||||
| |||||||||
SENS UP | OFF | ||||||||
SYNC | INT |
|
|
|
| ||||
WHITE BAL | ATW1 |
|
|
|
| ||||
|
|
|
| ||||||
MOTION DET | OFF | ||||||||
DNR | HIGH | ||||||||
RESOLUTION | HIGH | ||||||||
BW MODE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
Step 1
Provide a VS signal to the external synchro- nizing input connector on the rear side of the camera.
→ The "SYNC" setting automatically changes to "EXT (VS)".
"SYNC" screen
| **SYNC** |
|
| |
H PHASE |
|
| 128 | |
...... | ||||
|
| - | + |
|
RET TOP END
Step 2
Move the cursor to "EXT (VS)" and press the setting button.
→The "SYNC" screen appears.
Step 3
Connect the video output signal and external synchronizing input signal of the camera to a
Step 4
Adjust the oscilloscope to the horizontal rate, and extend the horizontal synchronizing part of the oscilloscope.
Move the cursor horizontally to adjust the horizontal phase with use of the right or left button.
Adjustable range: 0 to
34