Panasonic WV-CL930, WV-CL934 operating instructions Connect the power cord and turn on the power

Page 15

bUse a cable tie (locally procured) to attach the coaxial cable to the camera mounting base.

Important:

•The cable tie shall be made of metallic or durable material to be strong enough because the tie plays the role of camera drop prevention measures in case.

<Installation sample on a ceiling>

<Installation sample on a wall>

Camera mounting base (option)

The cable shall be tied to the camera mounting base.

Camera mounting base (option)

The cable shall be tied to the camera mounting base.

nConnect the power cord and turn on the power.

WV-CL930

Connect between the power connector on the rear side of the camera and a plug socket with the supplied power cord.

Power cord (accessory)

120 V AC,

60 Hz

120V ~ 50Hz

GEN-LOCK

VIDEO OUT

POWER

ALARM	GND
	OUT
DAY/	GND
NIGHT	IN

Caution:

The camera shall be connected with cord set with plug.

Plug for respective country shall be mounted on the Power cord by a qualified electrical.

15

Image 15

Contents WV-CL934 English Version Contents Important Safety Instructions Limitation of Liability Disclaimer of WarrantyNight monochrome image activation function equipped PrefaceIntroduction of near-infrared CCD Auto back focus function ABF equippedPrecautions Avoid connections during a lightning storm Avoid installing in the following locationsInstalling place Mounting screwsWV-CL934 Major Operating Controls and Their FunctionsWV-CL930/WV-CL934 WV-CL930External terminal 0Power connector only for WV-CL930 ALC lens connectorExternal synchronization switch Operation buttons Power indicatorLens type Model No Installations/ConnectionsALC lens connector ALC connector Locally procured Quantity Installation ApplicableWV-CL930 Connect the power cord and turn on the powerWV-CL934 Adjust the focusHow to use fixed focus lens Setting of external synchronization switch External terminalColor/black-and-white input Setup Menus Setup menu listSetup item Description Language Setup Step Basic operationChange of settings Selection of setting itemCamera title setting Camera ID Camera Operation Setup Camera SetupCharacter entry Backlight compensation Method of controlling quantity of light ALC/ELCCamera Setup screen Preset mode settingSensing area setting for backlight compensation Flare compensation mode Electronic shutter setting ShutterGain control setting AGC Electronic sensitivity enhancement setting Sens UP INT ↔ LL Synchronization setting SyncAdjustment of phase in power supply synchronization mode LL Adjustment of phase in VBS genlock mode VBS Adjustment of phase in VS genlock mode VS White balance setting White BAL Motion detector function setting Motion DET Manual fine adjustment of white balanceDescription about motion detector function MODE1 Demonstration mode Description about motion detector function MODE2Detection condition Advanced settings about motion detector function MODE1 Step Camera Setup screen BW Mode screen Digital noise reduction function setting DNRImage resolution setting Resolution Settings in black-and-white mode BW ModeStep Mosaics the zone Privacy zone setting Privacy ZoneOFF default Displays the zone normally Grays the zoneImage horizontal flip Mirror Lens type setting LENS-DRIVEImage stabilizer setting Stabilizer Back focus adjustment Back focus setting BACK-FOCUS SetupABF Auto Pedestal level adjustment Pedestal Special Menu Setup Special SetupChroma level adjustment Chroma Gain Aperture level adjustment AP GainPIX OFF screen Pixel compensation Pixel compensation PIX OFFCommunication configuration Communication Default restoring Camera ResetSerial number viewing SER.NO Language Selection Language Setup Shortcut Operation BLC Preset OFFCause/solution TroubleshootingSymptom ALC/ALC+/ELC SpecificationsStandard Accessories Panasonic Canada Inc