Panasonic WV-CL934, WV-CL930 operating instructions Adjust the focus

WV-CL934

Select either 24 V AC or 12 V DC for power supply and connect the power supply to the AC/DC power terminal.

AC 24V IN

DC 12V IN

1-L

GEN-LOCK VIDEO OUT

POWER

2-N

Caution:

To prevent fire or electric shock haz- ard, use a UL listed cable (VW-1, style 1007) for the 24 V AC or 12 V DC Input Terminal.

ALARM	GND
	OUT
DAY/	GND
NIGHT	IN

+–

12 V DC or 24 V AC

mAdjust the camera angle by loosening the screw of the camera mounting base while viewing the video monitor.

Be sure to loosen the screw of the camera mounting base when the camera angle is adjusted. If the camera angle is changed when the screw is tight, excessive force is applied to the camera mounting base and camera, and accordingly they may be dam- aged. Be sure to tighten the screw securely after camera angle adjustment.

,Adjust the focus.

When an auto iris lens is used, the originally adjusted focus may be slightly off depending on the iris state resulting from the focal depth of the lens. In such a case, open the iris by darkening the subject as much as possible and adjust the focus, and the focus-off state can be prevented.

Use of "ABF" of "BACK-FOCUS SETUP" in the setup menu (☞ page 45) allows users to adjust the focus optimally in the range of the capability to automatically follow the variation in illuminance. (Note: The adjusted focal point is not necessarily the same as the optimal focal point at the specified illuminance.)

•The out-of-focus level in the near-infrared light region may be higher than that in the

visible light region.

Setting "C/L ←→ B/W" of "BACK-FOCUS SETUP" to "AUTO" or "PRESET" in the setup menu allows users to adjust the focus in both the near-infrared light and visible light regions. (The variation in illuminance is not followed after focus adjustment.)

How to use varifocal lens/zoom lens

•Reset the back focus position to the CS mount default position before the back focus adjustment. (Press the right and left buttons among the operation buttons simultaneously, or move the cursor to "MANUAL-ADJ" of "BACK-FOCUS SETUP" in the setup menu and press the right and left buttons simultaneously after pressing the setting button.)

•Be aware that the adjustment method varies with varifocal lens or zoom lens models. For further information, refer to the operating instructions for the lens to be used.

16