Panasonic WV-CL934, WV-CL930 operating instructions Character entry

Page 24

<Character entry>

•To revise a character, move the cursor to the arrow (↑) in the editing area, move the cursor (↑) to the character to be

revised with use of the right and left but- tons, and enter a correct character.

•To enter a blank, move the cursor to "SPACE" and press the setting button.

•To delete all the entered characters, move the cursor to "RESET" and press the setting button.

Step 3

Move the cursor to "POSI" and press the set- ting button after title entry.

→The display positioning screen appears.

Step 4

Use the up, down, right, and left buttons to decide the title position and press the setting button.

→The camera title and title position are specified.

24

Image 24

Contents WV-CL934 English Version Contents Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityPreface Introduction of near-infrared CCDAuto back focus function ABF equipped Night monochrome image activation function equippedPrecautions Avoid installing in the following locations Installing placeMounting screws Avoid connections during a lightning stormMajor Operating Controls and Their Functions WV-CL930/WV-CL934WV-CL930 WV-CL934ALC lens connector External synchronization switch Operation buttonsPower indicator External terminal 0Power connector only for WV-CL930Installations/Connections Lens type Model NoALC lens connector ALC connector Locally procured Installation Applicable QuantityConnect the power cord and turn on the power WV-CL930Adjust the focus WV-CL934How to use fixed focus lens Setting of external synchronization switch External terminalColor/black-and-white input Setup Menus Setup menu listSetup item Description Language Setup Basic operation StepSelection of setting item Change of settingsCamera Operation Setup Camera Setup Camera title setting Camera IDCharacter entry Method of controlling quantity of light ALC/ELC Backlight compensationPreset mode setting Camera Setup screenSensing area setting for backlight compensation Electronic shutter setting Shutter Flare compensation modeGain control setting AGC Electronic sensitivity enhancement setting Sens UP Synchronization setting Sync INT ↔ LLAdjustment of phase in power supply synchronization mode LL Adjustment of phase in VBS genlock mode VBS Adjustment of phase in VS genlock mode VS White balance setting White BAL Motion detector function setting Motion DET Manual fine adjustment of white balanceDescription about motion detector function MODE1 Demonstration mode Description about motion detector function MODE2Detection condition Advanced settings about motion detector function MODE1 Step Digital noise reduction function setting DNR Image resolution setting ResolutionSettings in black-and-white mode BW Mode Camera Setup screen BW Mode screenStep Privacy zone setting Privacy Zone OFF default Displays the zone normallyGrays the zone Mosaics the zoneLens type setting LENS-DRIVE Image horizontal flip MirrorImage stabilizer setting Stabilizer Back focus setting BACK-FOCUS Setup Back focus adjustmentABF Auto Special Menu Setup Special Setup Chroma level adjustment Chroma GainAperture level adjustment AP Gain Pedestal level adjustment PedestalPixel compensation PIX OFF PIX OFF screen Pixel compensationCommunication configuration Communication Default restoring Camera ResetSerial number viewing SER.NO Language Selection Language Setup BLC Preset OFF Shortcut OperationTroubleshooting Cause/solutionSymptom Specifications ALC/ALC+/ELCStandard Accessories Panasonic Canada Inc