Chroma phase level (hue) adjustment [HUE]
Use the right or left button to adjust the hue of the camera image. Be sure to view a vector chromaticity indicator or a color video monitor when the adjustment is performed.
Note:
Holding down the right and left buttons for more than 2 seconds simultaneously restores the settings of “CHROMA GAIN”, “AP GAIN”, “PEDESTAL”, and “HUE” to the default set- tings.
Pixel compensation [PIX OFF]
Flaws in the displayed camera image are corrected, which is called pixel compensation. Up to 16 points can be corrected. Follow the procedure below to perform pixel compensation.
"SPECIAL SETUP" screen
**SPECIAL SETUP** |
| |
CHROMA GAIN | ......128 | |
AP GAIN | ......128 | |
PEDESTAL | ......128 | |
HUE | ......128 | |
| - | + |
PIX OFF
COMMUNICATION COAX CAMERA RESET 
PUSH SW
SER.NO. XXXXXXXX
RET TOP END
|
|
| "PIX OFF" screen | Pixel compensation | ||
|
|
| positioning screen | |||
|
|
|
|
|
| |
|
|
| **PIX OFF** |
|
| |
|
|
| 2 | 3 | 4 |
|
1 |
|
| ||||
| 5 |
| 6 | 7 | 8 |
|
9 |
| 10 | 11 | 12 |
| |
13 |
| 14 | 15 | 16 |
| |
000 | 000 |
|
|
| ||
RET TOP END
Step 1
Move the cursor to "PIX OFF" and press the setting button.
→The "PIX OFF" screen appears.
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the setting button.
→The pixel compensation positioning screen appears.
Step 3
Use the up, down, right, and left buttons to move the crosshair cursor to the center of the flaw to be corrected and press the setting button.
→The flaw is corrected and the pixel compensation point is registered. The "PIX OFF" screen
appears again. "*" is attached at the right side of the number when registration is complet- ed. The coordinate is expressed in figures.
48