Panasonic WV-CL934, WV-CL930 operating instructions Digital noise reduction function setting DNR

9. Digital noise reduction function setting [DNR]

The digital noise reduction function reduces noise automatically under the condition of low illu- minance. The effect level of the noise reduction function is selectable from the following:

LOW: Low level of noise reduction (small residual image)

MID: Medium level of noise reduction (medium residual image)

HIGH (default): High level of noise reduction (large residual image)

10. Image resolution setting [RESOLUTION]

A resolution of camera images is selectable from the following:

NORMAL: Horizontal resolution of 480 TV lines or more

HIGH (default): Horizontal resolution of 540 TV lines typ.

Note:

When the electronic sensitivity enhancement function, "SENS UP", is activated under the condition that "HIGH" is selected, noise may increase.

11. Settings in black-and-white mode [BW MODE]

The settings regarding the black-and-white mode are performed.

Follow the procedure below for settings regarding the black-and-white mode.

"CAMERA SETUP" screen				"BW MODE" screen		"BW MODE" screen
		**CAMERA SETUP** 1/2		**BW MODE**		**BW MODE**
	CAMERA ID		OFF
	ALC/ELC		ALC	BW	OFF	BW	AUTO1
	SHUTTER		OFF			LEVEL	HIGH
	AGC		ON			DURATION TIME ...
	SENS UP		OFF				S L
	SYNC		INT
	WHITE BAL		ATW1	BURST(BW)	ON	BURST(BW)	ON
	MOTION DET		OFF
	DNR		HIGH
	RESOLUTION		HIGH	RET TOP END		RET TOP END
	BW	MODE

Step 1

Move the cursor to "BW MODE" and press the setting button.

→The "BW MODE" screen appears.

Step 2

Move the cursor to "BW" and select the black-and-white control from the following:

AUTO1: Automatically toggles between color and black-and-white images in accor- dance with the screen brightness (illumi- nance). The black-and-white mode is selected for dark images, and the color mode is selected for bright images.

AUTO2: Uses a near-infrared light source at nighttime.

EXT: Is selected to control switching between color and black-and-white images after connecting an external device to the external terminal (DAY/ NIGHT). (☞ page 18)

40