Included in Delivery, Front View, LED Disk

INCLUDED IN DELIVERY

Please check the contents of the packaging, which in addition to the appliance should contain the following accessories:

•1 remote control Syr-D

•2 AAA (LR3) batteries

•1 stereo set of RCA cables

•1 cable with 3.5 mm jack connectors for POWER CONTROL

•1 power cable

•this manual

DESCRIPTION OF THE APPLIANCE

FRONT VIEW

1.Keys for MP3 playback control These are the buttons for controlling the playback of the built-in MP3 player.

2.VOLUME: Volume dial

This is the knob for the adjustment of the main volume level of the system. It consequently controls the volume of the headphone and the signal of the stereo preamplifier outputs (14).

3. INPUT: Input Selector

This dial allows you to choose one of the four input sources (USB, S1, S2 or S3).

4. LED “DISK”

Although anyone who enjoys listening to music through headphones will often find that there is a headphone connection in many audio source de- vices or amplifiers, the quality of the built-in head-

amplifier combination at any time. The built-in MP3 player also allows you to play music in this format from external USB storage media and most portable players with USB connections. A big

This LED remains illuminated as long as a supported USB memory or USB player is connected to the SA-96.

4 5. LED “MP3”

phone amplifier modules is usually far below what the headphones are capable of. To get round this,

benefit here is the compact design which permits you to take this universal device with you anywhe-

This LED remains illuminated as long as a supported USB device that contains supported

you need a separate headphone amplifier with high quality discrete amplifier circuitry.

But the Vincent SA-96 is much more than this: the combination of a high quality stereo preamplifier for three high level sources (CD player, tuner etc.), a headphone amplifier and a player for MP3 music from USB data storage media. So with this preamplifier, suitable main amplifiers and loud- speakers, you can build a small stereo system that positively stands out from the standard format of normal hifi components.

As a headphone preamplifier this device fulfils the desire to switch between and listen to various music sources in the best quality without having to use an amplifier with loudspeaker outputs. The system can then be upgraded to a pre-and-main-

re. Two stereo preamplifier outputs permit connec- tion to one or more main amplifiers. The unmodi- fied signal of the currently chosen source can be transmitted via the recording output to a recording device. If the main amplifier(s) and audio sources used support POWER CONTROL, the entire system can be switched on and off with one switch on this preamplifier. Naturally, it all comes with the highest quality workmanship and an out- standing price performance ratio.

Technically and visually designed for Vincent’s solidLine, the device is especially suitable as preamplifier for the Vincent SP-996 or SP-997 models. This preamplifier is also the ideal partner for Vincent CD players and tuners. In combination with the HiFi furniture and speaker cables from the range, one can build a perfectly harmonious system.

6	MP3 files is connected to the SA-96.

6.LED: “PLAY“

This LED remains illuminated as long as MP3 files are being played back by the SA-96.

7. SR: Infrared receiver for the remote control

8. PHONES: Headphone socket

Headphones with an impedance of at least 32Ω can be connected to this 6.3 mm jack socket.

9. USB: Connection socket for USB storage medium

You can connect a USB storage medium here. If this contains MP3 files, these can be played with the MP3 player built into the SA-96.

10.POWER

This is the main power switch for turning on and off the device. The SA-96 is separated from the mains voltage when switched off and cannot be set into a standby state.

26Vincent

Vincent 27