| Section |
Available accessories | 03 |
|
|
Shows when an incoming call has been re- ceived and not checked yet.
!Incoming call notice is not displayed for calls made when your cellular phone is disconnected from this unit.
Important
!Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage.
!Operations may vary depending on the kind of cellular phone.
!Advanced operations that require your atten- tion such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place.
Notes
!The equalizer curve for the phone source is fixed.
!When selecting the phone source, you can only operate Fader/Balance (balance adjust- ment) in the audio menu.
Setting up for hands-free phoning
Before you can use the
1Connection
For detailed instructions on connecting your phone to this unit via Bluetooth wireless technol- ogy, see following section. Function and operation on the next page.
!To make best use of the technology, we re- commend you register the phone to this unit.
2Registration
To register your temporarily connected phone, refer to Set phone (registereing a connected cellu- lar phone) on page 23.
3Volume adjustment
Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is recorded in this unit as the default setting.
!Caller’s voice volume and ring volume may vary depending on the type of cellular phone.
!If the difference between the ring volume and caller’s voice volume is big, overall volume level may become unstable.
!Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected.
Making a phone call
Voice recognition
1Press BAND/ESC and hold until Voice dial ap- pears in the display.
Voice dial appears in the display. When Voice dial ON is displayed, voice recognition function is now ready.
!If your cellular phone does not feature voice recognition function, No voice dial appears in the display and operation is not possible.
2Pronounce the name of your contact.
English
En 21