Pioneer P7200HD operation manual Storing and recalling broadcast stations, Press list, 26 En

Section

03Available accessories

For details concerning operation, refer to the XM tuner’s operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner’s operation manual.

Storing and recalling broadcast stations

You can easily store up to six stations for each band as presets.

!Six stations for each band can be stored in memory.

Basic Operations

			1 Press (list).
1	2	3 4	Preset screen is displayed.

5

1XM band indicator

2XM channel number indicator

3XM preset number indicator

4XM channel select setting indicator

Shows what channel select setting has been selected. CH is displayed when

Channel number is selected, and CAT is dis- played when Category is selected.

5XM text information

Shows the text information of broadcast channel.

Select an XM band.

1Press BAND/ESC.

!Band can be selected from XM-1, XM-2 or XM-3.

Select a channel.

1Push M.C. left or right.

!If you push and hold M.C. left or right, you can increase or decrease channel number continuously.

!You can also perform tuning from a desired channel category. (Refer to Selecting a chan- nel in the channel category on the next page.)

Switching the XM display

1Press and hold DISP//SCRL.

2Use M.C. to store the selected station in memory.

Turn to change the preset number. Press and hold to store.

3Use M.C. to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing M.C. up or down.

Advanced operations using special buttons

Selecting the XM channel select mode

1Press S.Rtrv/SAT MODE to cycle between: Channel number (channel number select set- ting)—Category (channel category select setting)

Function and operation

1Press M.C. to display the main menu.

2Use M.C. to select FUNCTION.

The function selection menu is displayed. Turn to change the menu option. Press to select.

3 Turn M.C. to select the function. After selecting, perform the following proce- dures to set the function.

26 En