AMX manual MVP-WDS Wall Mount cutout dimensions using expansion clips

MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box

12.70 [323MM] BEZEL OUTLINE

11.06 [281MM]

.25 [6MM] TYP

FRONT BEZEL OUTLINE

2X .52 [13MM]

1.00 [25MM] TYP

THESE NOTCHES ARE ONLY NEEDED IF UNIT IS INSTALLED USING DRYWALL EXPANSION CLIPS (4 PROVIDED)

R.13 [3MM] TYP

7.91 [201MM]

4X R.13 [3MM] MAX RADIUS IN CORNERS

CUTOUT

2X .22 [5MM]

8.63[219MM]

BEZEL OUTLINE

FIG. 10 MVP-WDS Wall Mount cutout dimensions using expansion clips

5.Carefully insert the main unit (with expansion clips) into the cutout so that the Mounting Tabs on the MVP-WDS lie flush against the wall.

Four notches are required to accommodate the four expansion clips (included)

Install the four included drywall clip sets at these locations

#6-32 Faceplate

Security Screws (2)

Die Cut Foam covers (2)

A - Faceplate

Mounting Tab

B - MVP-WDS (Main unit)

FIG. 11 MVP-WDS installation configuration for drywall surfaces

10 MVP-WDS Wall Docking Station for MVP Panels