AMX manual MVP-WDS Specifications

MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box

Specifications

MVP-WDS Specifications

Dimensions (HWD):	• 8.59" x 12.66" x 3.40" (21.82 cm x 32.16 cm x 8.64 cm)
	Note: Always use the cutout/installation dimensions for the MVP-WDS
	when installing this unit into various surfaces. This SP engineering drawing
	is available online at www.amx.com. Refer to the Installation section on
	page 4 for details.
Power Requirements:	• Stand-alone with no batteries: 0.1 A @ 12 VDC
	• Stand-alone charging two batteries: 2.1 A @ 12 VDC
	• With no batteries and charging a connected MVP panel’s two internal
	batteries: 3.3 A @ 12 VDC
	• With two batteries and charging a connected MVP panel’s two internal
	batteries: 3.3 A @ 12 VDC
Weight:	• Stand-alone: 4.67 lbs (1.89 kg)
	• With two batteries: 5.47 lbs (2.48 kg)
Available Colors:	• MVP-WDS (Black) - FG5965-11
	• MVP-WDS (Silver) - FG5965-21
Charging Features:	• Two Battery Bays: Simultaneous Charging
	• Charge time for two depleted batteries ~ 5 hours
Front Panel Components:	• Securing Magnet
	• Security Latch: Adds the primary layer of security when mounting the MVP.
	When the MVP is inserted, this latch grabs onto the rear of the MVP and
	secures it from being removed.
	• Interface Connector Pins: A set of retractable pins (male) that connect to
	the underside MVP connector strip. This connection provides both
	communication and power between the MVP and the MVP-WDS.
	• Support Cradle: This retractable mechanism supports a resting MVP panel
	and allows a user to either insert or remove a connected MVP panel.
	• LEDs: Two blue LEDs indicate either:
	- Left LED monitors the battery status within either the MVP-WDS or MVP
	- Right LED monitors communication between the MVP-WDS and MVP.
	• Security Release pushbutton: Located on the front of the unit, this
	pushbutton toggles an on-screen security keypad (if security is enabled).
	- Entering the correct release code allows the MVP-WDS to release the
	MVP from the security latch.
	• Battery Compartment: Houses up to two MVP-BP batteries.
Side Panel Components:	• Host USB Connectors: Two type A USB ports connect an external
	keyboard and mouse device for use with the G4 Computer Control
	application.
	• Power Connector: 2-pin 3.5 mm mini-Phoenix (male) connector.
Operating/Storage	• Operating Temperature: 0° C (32° F) to 40° C (104° F)
Environments:	• Operating Humidity: 20% - 85% RH
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% - 85% RH
Included Accessories:	• Installation Kit (KA2250-01):
	- One 2-pin 3.5 mm mini-Phoenix connector (41-5025)
	- One strip containing two plastic Die Cut Foam covers (60-5965-47)
	- Two #6-32 Faceplate Securing screws (80-0193-01)
	- Four Phillips-head screws (#4-32 x 0.250 Black) (80-0112)
	- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)

2 MVP-WDS Wall Docking Station for MVP Panels