Blaupunkt MP76 operating instructions Navigation audio, Activating the navigation audio

Page 10

Volume

If the sound system receives a trafﬁc an- nouncement during a telephone call, you will only be able to hear the trafﬁc an- nouncement after the call is ﬁnished (in so far as the trafﬁc announcement is still being broadcast).

If the sound system receives a call during a trafﬁc announcement, the playback of the trafﬁc announcement is interrupted and the call is answered.

You can adjust the volume with which the telephone calls are answered.

Press the MENU button 9.

Press the softkey 5 with the display label "VOLUME".

Press the softkey 5 with the display label "PHONE" to set the volume.

Adjust the desired volume with volume control 2.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Note:

During the phone call, you can always change the volume by means of the vol- ume control 2.

Navigation audio

Instead of a second external audio source ("AUX2", see "External audio sources"), you can also connect a navigation system.

If your car sound system is connected to navigation system, the voice output of the navigation is "mixed" in with the current au- dio source and played back using the loud- speakers of the car sound system.

For this purpose, the navigation system be connected to the car sound system as de- scribed in the installation instructions and switched on in the menu.

You can ﬁnd out from your Blaupunkt dealer which navigation systems can be used with your car sound system.

Activating the navigation audio

You can connect either a second external audio source or a navigation system to this device. For this purpose, you must deﬁne in the menu which device has been con- nected.

Press the MENU button 9.

Press the softkey 5 with the display label "AUX".

The AUX menu is displayed.

If you connected a navigation system, press the softkey 5 with the display label "NAV/AUX2" repeatedly until the setting "NAVIGATION ON" appears.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

62

Image 10

Contents Bremen MP76 Page Slot for MMC/SD CD mode VolumeDisplay Repeating individual tracks or MP3 modeAdjusting high-pass ﬁlters for Front/rear TMC for dynamic navigation SystemsInstallation Road safetySafety note Disposal of old unit Detachable control panel Activating/deactivating demo mode Theft protection Detaching the control panelSwitching on/off using the vehicle ignition Switching on/offSwitching on/off using button Attaching the control panelRisk of injury VolumeSetting the power-on volume MuteNavigation audio Activating the navigation audioAdjusting the treble Sound and volume relationshipAdjusting the bass Adjusting the navigation minimum volumeTo adjust the balance, press the Audio button Setting the left/right volume ratio balanceAdjusting the front/rear volume ratio fader To adjust the fader, press the Audio buttonAdjusting the display brightness Adjusting the viewing angleSetting the button illumination colour DisplaySelecting a preset colour Setting the display illumination colourMixing a colour for the display illumination Inverting display contents Adjusting the tuner Radio modeSetting the number of antennas PRE mode static Switching to radio modeSelecting static/dynamic radio mode FM only Digital Directional Antenna mode DDA staticSwitching REG on/off Selecting the radio modeSwitching the RDS function on/off Convenient RDS functions AF, REGBand is displayed To switch between the FM memory banks FM1, FM2, FM3 and FMTSelecting the waveband/memory bank Selecting a wavebandAutomatic station seek tuning Tuning into a stationSetting the sensitivity of station seek tuning Tuning into stations manuallyStoring stations Setting the scanning timeScanning receivable stations Scan Storing stations automatically TravelstoreActivating PTY Listening to stored stationsProgramme type PTY Deactivating PTYAdjusting HiCut Selecting a programme type and starting seek tuningTreble reduction feature during interference HiCut Optimising radio receptionSwitching TIM off Switching TIM on/offTIM Trafﬁc Information Memory Selecting the TIM message Switching TIM onRecording trafﬁc announcements Playing stored trafﬁc announcementsSetting the timer Selecting timersSwitching trafﬁc information priority on/off Setting the volume for trafﬁc announcementsTrafﬁc information Selecting tracks CD modeEjecting a CD Starting CD mode, inserting a CDRepeating tracks Repeat Fast searching audibleRandom track play MIX Scanning tracks ScanTrafﬁc announcements in CD mode MP3 modeAdjusting the scrolling text Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Operation during the MP3 mode Switching to MMC/SD modeActivating the MP3 mode of CD Inserting an MMC/SDMP3 main menu Press the Next button 4to redisplay the MP3 main menuTrack from it Selecting a track with the joystickConﬁguring the display Cancelling Scan and continuing listening to a trackRepeating individual tracks or whole directories Repeat Press the softkey 5 with the display label Show ALL Adjusting the scrolling textNext tracks are scanned in ascending order Switching to CD-changer mode CD changer mode optionalSelecting CDs Repeat CD brieﬂy appears on the dis- play Naming CDsRepeating individual tracks or whole CDs Repeat To stop the current track or current CD from being repeatedDeleting all CD names Deleting a CD nameCD name is deleted CD names are deletedSetting the clock manually Setting the timeSetting the time automatically Setting the dateSwitching DSA off DSA Max Digital Sound AdjustmentSwitching DSA on/off Permanent time displayTo reactivate the equalizer Switching DSA onAutomatically calibrating the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerAfter the calibration or the manual adjust- ment Resetting the equalizerSelecting a sound presetting Preset Presettings for the following music styles are availableSelecting the stage effect Adjusting the stage effectSelecting a sound effect Changing the virtual distance of the loudspeakersCalibrating DNC Switching DNC offStarting the DNC calibration Selecting a DNC increase Adjusting the subwoofer increaseSubwoofer and centre speaker To select a DNC increaseSetting the low-pass ﬁlter Adjusting the subwoofer phase positionSetting the subsonic ﬁlter Adjusting the centre speaker Adjusting high-pass ﬁlters for front/rearCrossover TMC for dynamic navigation systems101 External audio sources Switching the internal ampliﬁer on/offAmpliﬁer/Sub-Out 102Naming the AUX input Switching the AUX input on/offBe selected using the Source button Press the softkey 5 with the display label AUX1Miscellaneous Resetting the deviceEntering a switch-on message Displaying the serial numberSpeciﬁcations 319 Gerätepass