Blaupunkt MP76 Scanning receivable stations Scan, Setting the scanning time, Storing stations

Page 21

Radio mode

Scanning receivable stations (SCAN)

You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds.

Starting SCAN

￿Press and hold down the OK joystick 8for longer than two seconds.

Scanning begins. "SCAN" appears briefly on the display followed by a flashing display of the current station name or the frequen- cy of the station.

Cancelling SCAN and continuing listening to a station

￿Press the OK joystick 8.

Scanning stops and the radio continues playing the station that it tuned into last.

Setting the scanning time

￿Press the MENU button 9.

￿Press the softkey 5 with the display label "VARIOUS".

￿Press the softkey 5 with the display label "SCANTIME".

￿Move the joystick 8 up or right or down or left to set the scan time.

￿Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Note:

The defined scanning time is also ap- plied by the system to scanning carried out in CD/MP3 and CD-changer mode.

Storing stations

Storing stations manually

￿ Select the desired FM memory bank

 

(FM1, FM2, FM3, FMT) or one of the

 

 

wavebands (MW, LW or SW).

ENGLISH

￿

Tune into the desired station as de-

 

scribed under "Tuning into a station".

￿ Press and hold down one of the six softkeys for longer than two seconds to which you want to assign the station.

Storing stations automatically (Travelstore)

You can automatically store the six stations offering the strongest reception in the re- gion (FM only). The stations are stored in the FMT memory bank.

Notes:

If your device is set to the region USA, you can also start the Travelstore in the AM radio mode. The stations are then stored on the AMT level.

Any stations that were previously stored in this memory bank are de- leted in the process.

Starting the Travelstore function

￿Press the TUNER button = in radio mode.

The display shows the radio function menu.

￿Press the softkey 5 with the display label "T-STORE".

The storing procedure begins. "TRAVEL STORE" appears on the display. After the process has completed, the radio will play the station that is stored in memory location one of the FMT (or AMT) memory bank.

73

Image 21
Contents Bremen MP76 Page Slot for MMC/SD Volume CD modeDisplay Adjusting high-pass filters for Front/rear MP3 modeRepeating individual tracks or TMC for dynamic navigation SystemsSafety note Road safetyInstallation Disposal of old unitTheft protection Activating/deactivating demo modeDetachable control panel Detaching the control panelSwitching on/off using button Switching on/offSwitching on/off using the vehicle ignition Attaching the control panelSetting the power-on volume VolumeRisk of injury MuteActivating the navigation audio Navigation audioAdjusting the bass Sound and volume relationshipAdjusting the treble Adjusting the navigation minimum volumeAdjusting the front/rear volume ratio fader Setting the left/right volume ratio balanceTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonSetting the button illumination colour Adjusting the viewing angleAdjusting the display brightness DisplaySetting the display illumination colour Selecting a preset colourMixing a colour for the display illumination Inverting display contents Radio mode Adjusting the tunerSetting the number of antennas Selecting static/dynamic radio mode FM only Switching to radio modePRE mode static Digital Directional Antenna mode DDA staticSwitching the RDS function on/off Selecting the radio modeSwitching REG on/off Convenient RDS functions AF, REGSelecting the waveband/memory bank To switch between the FM memory banks FM1, FM2, FM3 and FMTBand is displayed Selecting a wavebandSetting the sensitivity of station seek tuning Tuning into a stationAutomatic station seek tuning Tuning into stations manuallyScanning receivable stations Scan Setting the scanning timeStoring stations Storing stations automatically TravelstoreProgramme type PTY Listening to stored stationsActivating PTY Deactivating PTYTreble reduction feature during interference HiCut Selecting a programme type and starting seek tuningAdjusting HiCut Optimising radio receptionSwitching TIM on/off Switching TIM offTIM Traffic Information Memory Recording traffic announcements Switching TIM onSelecting the TIM message Playing stored traffic announcementsSelecting timers Setting the timerSetting the volume for traffic announcements Switching traffic information priority on/offTraffic information Ejecting a CD CD modeSelecting tracks Starting CD mode, inserting a CDRandom track play MIX Fast searching audibleRepeating tracks Repeat Scanning tracks ScanAdjusting the scrolling text MP3 modeTraffic announcements in CD mode Switching CD scrolling text on/offD01 D02 Inserting/removing MMCs/SDsActivating the MP3 mode of CD Switching to MMC/SD modeOperation during the MP3 mode Inserting an MMC/SDTrack from it Press the Next button 4to redisplay the MP3 main menuMP3 main menu Selecting a track with the joystickCancelling Scan and continuing listening to a track Configuring the displayRepeating individual tracks or whole directories Repeat Adjusting the scrolling text Press the softkey 5 with the display label Show ALLNext tracks are scanned in ascending order CD changer mode optional Switching to CD-changer modeSelecting CDs Repeating individual tracks or whole CDs Repeat Naming CDsRepeat CD briefly appears on the dis- play To stop the current track or current CD from being repeatedCD name is deleted Deleting a CD nameDeleting all CD names CD names are deletedSetting the time automatically Setting the timeSetting the clock manually Setting the dateSwitching DSA on/off DSA Max Digital Sound AdjustmentSwitching DSA off Permanent time displayAutomatically calibrating the equalizer Switching DSA onTo reactivate the equalizer EQ 1 For the driver aloneManually changing the graphical equalizer Viewing vehicle acoustics with/ without equalizerSelecting a sound presetting Preset Resetting the equalizerAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableSelecting a sound effect Adjusting the stage effectSelecting the stage effect Changing the virtual distance of the loudspeakersSwitching DNC off Calibrating DNCStarting the DNC calibration Subwoofer and centre speaker Adjusting the subwoofer increaseSelecting a DNC increase To select a DNC increaseAdjusting the subwoofer phase position Setting the low-pass filterSetting the subsonic filter Adjusting high-pass filters for front/rear Adjusting the centre speakerTMC for dynamic navigation systems Crossover101 Amplifier/Sub-Out Switching the internal amplifier on/offExternal audio sources 102Be selected using the Source button Switching the AUX input on/offNaming the AUX input Press the softkey 5 with the display label AUX1Entering a switch-on message Resetting the deviceMiscellaneous Displaying the serial numberSpecifications 319 Gerätepass