Blaupunkt MP76 Ampliﬁer/Sub-Out, External audio sources, Switching the internal ampliﬁer on/off

Page 50

Ampliﬁer/Sub-Out

External audio sources

Ampliﬁer/Sub-Out

The car sound system provides connec- tions that allow you to connect external ampliﬁers. In addition, you can connect a subwoofer to the integrated low-pass ﬁlter of the device. For this purpose, the ampli- ﬁer and subwoofer must be connected as described in the installation instructions.

We recommend you use well-matched products from the Blaupunkt or Velocity product ranges.

Switching the internal ampliﬁer on/off

If you are using external ampliﬁers, you can switch off the device’s internal ampliﬁer ("Internal Amp Off" setting).

Note:

Please check this setting if the loud- speakers do not emit any sound.

Press the MENU button 9.

Press the softkey 5 with the display label "VARIOUS".

Press the softkey 5 with the display label "AMP ON" repeatedly until the de- sired setting "INTERNAL AMP ON" or "INTERNAL AMP OFF" appears.

If the internal ampliﬁer is switched on, the softkey "AMP ON" is highlighted in dark.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

External audio sources

You can connect up to two external audio sources to the device. Audio sources can, for example, be portable CD players, Mini Disc players or MP3 players.

The ﬁrst external audio source can be con- nected instead of a CD changer (AUX1).

The second external audio source (AUX2) can be connected in addition to the CD changer or AUX1.

Instead of AUX2, you can connect a naviga- tion system. For further details, read the section "Navigation audio" in the chapter "Adjusting the volume".

To be able to use the AUX inputs, you must activate the AUX inputs in the setup menu.

If you want to connect an external audio source, you will need an adapter cable. This cable is available from a specialised Blau- punkt dealer.

102

Image 50

Contents Bremen MP76 Page Slot for MMC/SD Display VolumeCD mode Repeating individual tracks or MP3 modeAdjusting high-pass ﬁlters for Front/rear TMC for dynamic navigation SystemsInstallation Road safetySafety note Disposal of old unitDetachable control panel Activating/deactivating demo modeTheft protection Detaching the control panelSwitching on/off using the vehicle ignition Switching on/offSwitching on/off using button Attaching the control panelRisk of injury VolumeSetting the power-on volume MuteNavigation audio Activating the navigation audioAdjusting the treble Sound and volume relationshipAdjusting the bass Adjusting the navigation minimum volumeTo adjust the balance, press the Audio button Setting the left/right volume ratio balanceAdjusting the front/rear volume ratio fader To adjust the fader, press the Audio buttonAdjusting the display brightness Adjusting the viewing angleSetting the button illumination colour DisplayMixing a colour for the display illumination Setting the display illumination colourSelecting a preset colour Inverting display contents Setting the number of antennas Radio modeAdjusting the tuner PRE mode static Switching to radio modeSelecting static/dynamic radio mode FM only Digital Directional Antenna mode DDA staticSwitching REG on/off Selecting the radio modeSwitching the RDS function on/off Convenient RDS functions AF, REGBand is displayed To switch between the FM memory banks FM1, FM2, FM3 and FMTSelecting the waveband/memory bank Selecting a wavebandAutomatic station seek tuning Tuning into a stationSetting the sensitivity of station seek tuning Tuning into stations manuallyStoring stations Setting the scanning timeScanning receivable stations Scan Storing stations automatically TravelstoreActivating PTY Listening to stored stationsProgramme type PTY Deactivating PTYAdjusting HiCut Selecting a programme type and starting seek tuningTreble reduction feature during interference HiCut Optimising radio receptionTIM Trafﬁc Information Memory Switching TIM on/offSwitching TIM off Selecting the TIM message Switching TIM onRecording trafﬁc announcements Playing stored trafﬁc announcementsSetting the timer Selecting timersTrafﬁc information Setting the volume for trafﬁc announcementsSwitching trafﬁc information priority on/off Selecting tracks CD modeEjecting a CD Starting CD mode, inserting a CDRepeating tracks Repeat Fast searching audibleRandom track play MIX Scanning tracks ScanTrafﬁc announcements in CD mode MP3 modeAdjusting the scrolling text Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Operation during the MP3 mode Switching to MMC/SD modeActivating the MP3 mode of CD Inserting an MMC/SDMP3 main menu Press the Next button 4to redisplay the MP3 main menuTrack from it Selecting a track with the joystickRepeating individual tracks or whole directories Repeat Cancelling Scan and continuing listening to a trackConﬁguring the display Next tracks are scanned in ascending order Adjusting the scrolling textPress the softkey 5 with the display label Show ALL Selecting CDs CD changer mode optionalSwitching to CD-changer mode Repeat CD brieﬂy appears on the dis- play Naming CDsRepeating individual tracks or whole CDs Repeat To stop the current track or current CD from being repeatedDeleting all CD names Deleting a CD nameCD name is deleted CD names are deletedSetting the clock manually Setting the timeSetting the time automatically Setting the dateSwitching DSA off DSA Max Digital Sound AdjustmentSwitching DSA on/off Permanent time displayTo reactivate the equalizer Switching DSA onAutomatically calibrating the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerAfter the calibration or the manual adjust- ment Resetting the equalizerSelecting a sound presetting Preset Presettings for the following music styles are availableSelecting the stage effect Adjusting the stage effectSelecting a sound effect Changing the virtual distance of the loudspeakersStarting the DNC calibration Switching DNC offCalibrating DNC Selecting a DNC increase Adjusting the subwoofer increaseSubwoofer and centre speaker To select a DNC increase Setting the subsonic ﬁlter Adjusting the subwoofer phase position Setting the low-pass ﬁlter Adjusting the centre speaker Adjusting high-pass ﬁlters for front/rear101 TMC for dynamic navigation systemsCrossover External audio sources Switching the internal ampliﬁer on/offAmpliﬁer/Sub-Out 102Naming the AUX input Switching the AUX input on/offBe selected using the Source button Press the softkey 5 with the display label AUX1Miscellaneous Resetting the deviceEntering a switch-on message Displaying the serial numberSpeciﬁcations 319 Gerätepass