Blaupunkt MP76 Ejecting a CD, Selecting tracks, Starting CD mode, inserting a CD

Page 28

CD mode

CD mode

You can use this device to play standard au- dio CDs with a diameter of 12 cm.

CD-Rs and CD-RWs ("self-burned" CDs) can usually be played. Due to the varying qual- ity of CD blanks, however, Blaupunkt can- not guarantee a faultless function.

To ensure proper functioning, use only CDs with the Compact-Disc logo. Copy-pro- tected CDs can cause playback problems. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!

Risk of severe damage to the CD drive!

CD singles with a diameter of 8 cm and noncircular contoured CDs (shape CDs) must not be used.

We accept no responsibility for any dam- age to the CD drive that may occur as a result of the use of unsuitable CDs.

Starting CD mode, inserting a CD

If there is no CD inserted in the device,
press the	button 7.

The control panel opens out towards you.

Push the CD into the CD tray with the printed side facing up.

The drive draws in the CD.

You must not hinder or assist the drive as it draws in the CD.

The control panel automatically closes.

The CD menu is displayed and the CD play- back starts.

If a CD is already inserted in the device,

press the SOURCE button < repeat- edly until CD mode is displayed.

The CD menu is displayed, the playback starts at the point where it was interrupt- ed.

Ejecting a CD

press the button 7.

The control panel opens to the front, the CD is ejected.

Carefully remove the CD.

Press the button 7. The control panel closes.

Selecting tracks

Move the joystick 8 in one direction (up and right for the next or down and left for the previous track) until the number of the desired track appears on the display.

Pressing the joystick 8once down or left restarts the current track.

80

Image 28

Contents Bremen MP76 Page Slot for MMC/SD CD mode VolumeDisplay MP3 mode Adjusting high-pass ﬁlters for Front/rearRepeating individual tracks or TMC for dynamic navigation SystemsRoad safety Safety noteInstallation Disposal of old unitActivating/deactivating demo mode Theft protectionDetachable control panel Detaching the control panelSwitching on/off Switching on/off using buttonSwitching on/off using the vehicle ignition Attaching the control panelVolume Setting the power-on volumeRisk of injury MuteNavigation audio Activating the navigation audioSound and volume relationship Adjusting the bassAdjusting the treble Adjusting the navigation minimum volumeSetting the left/right volume ratio balance Adjusting the front/rear volume ratio faderTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonAdjusting the viewing angle Setting the button illumination colourAdjusting the display brightness DisplaySelecting a preset colour Setting the display illumination colourMixing a colour for the display illumination Inverting display contents Adjusting the tuner Radio modeSetting the number of antennas Switching to radio mode Selecting static/dynamic radio mode FM onlyPRE mode static Digital Directional Antenna mode DDA staticSelecting the radio mode Switching the RDS function on/offSwitching REG on/off Convenient RDS functions AF, REGTo switch between the FM memory banks FM1, FM2, FM3 and FMT Selecting the waveband/memory bankBand is displayed Selecting a wavebandTuning into a station Setting the sensitivity of station seek tuningAutomatic station seek tuning Tuning into stations manuallySetting the scanning time Scanning receivable stations ScanStoring stations Storing stations automatically TravelstoreListening to stored stations Programme type PTYActivating PTY Deactivating PTYSelecting a programme type and starting seek tuning Treble reduction feature during interference HiCutAdjusting HiCut Optimising radio receptionSwitching TIM off Switching TIM on/offTIM Trafﬁc Information Memory Switching TIM on Recording trafﬁc announcementsSelecting the TIM message Playing stored trafﬁc announcementsSetting the timer Selecting timersSwitching trafﬁc information priority on/off Setting the volume for trafﬁc announcementsTrafﬁc information CD mode Ejecting a CDSelecting tracks Starting CD mode, inserting a CDFast searching audible Random track play MIXRepeating tracks Repeat Scanning tracks ScanMP3 mode Adjusting the scrolling textTrafﬁc announcements in CD mode Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Switching to MMC/SD mode Activating the MP3 mode of CDOperation during the MP3 mode Inserting an MMC/SDPress the Next button 4to redisplay the MP3 main menu Track from itMP3 main menu Selecting a track with the joystickConﬁguring the display Cancelling Scan and continuing listening to a trackRepeating individual tracks or whole directories Repeat Press the softkey 5 with the display label Show ALL Adjusting the scrolling textNext tracks are scanned in ascending order Switching to CD-changer mode CD changer mode optionalSelecting CDs Naming CDs Repeating individual tracks or whole CDs RepeatRepeat CD brieﬂy appears on the dis- play To stop the current track or current CD from being repeatedDeleting a CD name CD name is deletedDeleting all CD names CD names are deletedSetting the time Setting the time automaticallySetting the clock manually Setting the dateDSA Max Digital Sound Adjustment Switching DSA on/offSwitching DSA off Permanent time displaySwitching DSA on Automatically calibrating the equalizerTo reactivate the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerResetting the equalizer Selecting a sound presetting PresetAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableAdjusting the stage effect Selecting a sound effectSelecting the stage effect Changing the virtual distance of the loudspeakersCalibrating DNC Switching DNC offStarting the DNC calibration Adjusting the subwoofer increase Subwoofer and centre speakerSelecting a DNC increase To select a DNC increaseSetting the low-pass ﬁlter Adjusting the subwoofer phase positionSetting the subsonic ﬁlter Adjusting the centre speaker Adjusting high-pass ﬁlters for front/rearCrossover TMC for dynamic navigation systems101 Switching the internal ampliﬁer on/off Ampliﬁer/Sub-OutExternal audio sources 102Switching the AUX input on/off Be selected using the Source buttonNaming the AUX input Press the softkey 5 with the display label AUX1Resetting the device Entering a switch-on messageMiscellaneous Displaying the serial numberSpeciﬁcations 319 Gerätepass