Blaupunkt MP76 Listening to stored stations, Programme type PTY, Activating PTY, Deactivating PTY

Page 22

Radio mode

Listening to stored stations

￿Select the memory bank or waveband.

￿Press the softkey 5 with the display label of the station name or the fre- quency of the desired station.

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide informa- tion on the type of programme that they are broadcasting. Your car radio can receive and display this information.

For example, the programme types can be:

CULTURE

TRAVEL

JAZZ

SPORT

NEWS

POP

ROCK

CLASSICS

 

You can use the PTY function to select sta- tions of a particular programme type.

PTY-EON

If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type.

Notes:

If the tuner does not find a station that corresponds to the selected pro- gramme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last.

If the tuned radio station or another station on the broadcasting network broadcastsyourselectedprogramme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD/ MP3 mode or CD-changer mode to the station whose programme type matches the one you selected.

Activating PTY

To use the PTY function,

￿press the TUNER button = in radio mode.

The display shows the radio function menu.

￿Press the NEXT button 4.

￿Press the softkey 5 with the display label "PROG TYP".

If PTY is activated, the display shows the current programme type. PTY is illuminat- ed on the display. The programme types are shown next to the softkeys 5.

Deactivating PTY

To deactivate the PTY function,

￿press the softkey 5 with the display label "PTY OFF" while the programme types are displayed.

74

Image 22
Contents Bremen MP76 Page Slot for MMC/SD CD mode VolumeDisplay Repeating individual tracks or MP3 modeAdjusting high-pass filters for Front/rear TMC for dynamic navigation SystemsInstallation Road safetySafety note Disposal of old unitDetachable control panel Activating/deactivating demo modeTheft protection Detaching the control panelSwitching on/off using the vehicle ignition Switching on/offSwitching on/off using button Attaching the control panelRisk of injury VolumeSetting the power-on volume MuteNavigation audio Activating the navigation audioAdjusting the treble Sound and volume relationshipAdjusting the bass Adjusting the navigation minimum volumeTo adjust the balance, press the Audio button Setting the left/right volume ratio balanceAdjusting the front/rear volume ratio fader To adjust the fader, press the Audio buttonAdjusting the display brightness Adjusting the viewing angleSetting the button illumination colour DisplaySelecting a preset colour Setting the display illumination colourMixing a colour for the display illumination Inverting display contents Adjusting the tuner Radio modeSetting the number of antennas PRE mode static Switching to radio modeSelecting static/dynamic radio mode FM only Digital Directional Antenna mode DDA staticSwitching REG on/off Selecting the radio modeSwitching the RDS function on/off Convenient RDS functions AF, REG Band is displayed To switch between the FM memory banks FM1, FM2, FM3 and FMT Selecting the waveband/memory bank Selecting a wavebandAutomatic station seek tuning Tuning into a stationSetting the sensitivity of station seek tuning Tuning into stations manuallyStoring stations Setting the scanning timeScanning receivable stations Scan Storing stations automatically TravelstoreActivating PTY Listening to stored stationsProgramme type PTY Deactivating PTYAdjusting HiCut Selecting a programme type and starting seek tuningTreble reduction feature during interference HiCut Optimising radio receptionSwitching TIM off Switching TIM on/offTIM Traffic Information Memory Selecting the TIM message Switching TIM onRecording traffic announcements Playing stored traffic announcementsSetting the timer Selecting timersSwitching traffic information priority on/off Setting the volume for traffic announcementsTraffic information Selecting tracks CD modeEjecting a CD Starting CD mode, inserting a CDRepeating tracks Repeat Fast searching audibleRandom track play MIX Scanning tracks ScanTraffic announcements in CD mode MP3 modeAdjusting the scrolling text Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Operation during the MP3 mode Switching to MMC/SD modeActivating the MP3 mode of CD Inserting an MMC/SDMP3 main menu Press the Next button 4to redisplay the MP3 main menuTrack from it Selecting a track with the joystickConfiguring the display Cancelling Scan and continuing listening to a trackRepeating individual tracks or whole directories Repeat Press the softkey 5 with the display label Show ALL Adjusting the scrolling textNext tracks are scanned in ascending order Switching to CD-changer mode CD changer mode optionalSelecting CDs Repeat CD briefly appears on the dis- play Naming CDsRepeating individual tracks or whole CDs Repeat To stop the current track or current CD from being repeatedDeleting all CD names Deleting a CD nameCD name is deleted CD names are deletedSetting the clock manually Setting the timeSetting the time automatically Setting the dateSwitching DSA off DSA Max Digital Sound AdjustmentSwitching DSA on/off Permanent time displayTo reactivate the equalizer Switching DSA onAutomatically calibrating the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerAfter the calibration or the manual adjust- ment Resetting the equalizerSelecting a sound presetting Preset Presettings for the following music styles are availableSelecting the stage effect Adjusting the stage effectSelecting a sound effect Changing the virtual distance of the loudspeakersCalibrating DNC Switching DNC offStarting the DNC calibration Selecting a DNC increase Adjusting the subwoofer increaseSubwoofer and centre speaker To select a DNC increaseSetting the low-pass filter Adjusting the subwoofer phase positionSetting the subsonic filter Adjusting the centre speaker Adjusting high-pass filters for front/rearCrossover TMC for dynamic navigation systems101 External audio sources Switching the internal amplifier on/offAmplifier/Sub-Out 102Naming the AUX input Switching the AUX input on/offBe selected using the Source button Press the softkey 5 with the display label AUX1Miscellaneous Resetting the deviceEntering a switch-on message Displaying the serial numberSpecifications 319 Gerätepass