Blaupunkt MP76 operating instructions Naming the AUX input, Switching the AUX input on/off, 103

Page 51

External audio sources

Switching the AUX input on/off

￿Press the MENU button 9.

￿Press the softkey 5 with the display label "AUX".

The AUX menu is displayed.

If no CD changer is connected and you want to connect an external audio source,

￿press the softkey 5 with the display label "AUX1".

With every press of the softkey "AUX1", you can switch between the settings "AUXILIA- RY 1 ON" and "AUXILIARY 1 OFF".

If no navigation system is connected and you want to connect an external audio source,

￿press the softkey 5 with the display label "NAV/AUX2".

With every press of the softkey "NAV/ AUX2", you can switch between the settings "AUXILIARY 2 ON" and "NAVIGATION ON".

Note:

If a CD changer is connected, the input "AUX1" cannot be changed.

￿Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Note:

If the AUX inputs are activated, they can

be selected using the SOURCE button <.

Naming the AUX input

You can name the AUX inputs, to be better able to assign them during the source selec- tion with the SOURCE button <(e.g., you can use the device name of the connected device).

￿Press the MENU button 9.

￿Press the softkey 5 with the display label "AUX".

The AUX menu is displayed.

￿Press the softkey 5 with the display label "EDIT" under "AUX1" or "NAV/ AUX2".

The display shows the standard text for the selected input. The input mark is at the be- ginning of the line and flashing.

To enter a name,

￿press the joystick 8 left or right to move the input mark.

￿Set the desired letter by pushing the joystick 8up or down.

￿After entering the name, press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

ENGLISH

103

Image 51
Contents Bremen MP76 Page Slot for MMC/SD Volume CD modeDisplay TMC for dynamic navigation Systems MP3 modeAdjusting high-pass filters for Front/rear Repeating individual tracks orDisposal of old unit Road safetySafety note InstallationDetaching the control panel Activating/deactivating demo modeTheft protection Detachable control panelAttaching the control panel Switching on/offSwitching on/off using button Switching on/off using the vehicle ignitionMute VolumeSetting the power-on volume Risk of injuryActivating the navigation audio Navigation audioAdjusting the navigation minimum volume Sound and volume relationshipAdjusting the bass Adjusting the trebleTo adjust the fader, press the Audio button Setting the left/right volume ratio balanceAdjusting the front/rear volume ratio fader To adjust the balance, press the Audio buttonDisplay Adjusting the viewing angleSetting the button illumination colour Adjusting the display brightnessSetting the display illumination colour Selecting a preset colourMixing a colour for the display illumination Inverting display contents Radio mode Adjusting the tunerSetting the number of antennas Digital Directional Antenna mode DDA static Switching to radio modeSelecting static/dynamic radio mode FM only PRE mode staticConvenient RDS functions AF, REG Selecting the radio modeSwitching the RDS function on/off Switching REG on/offSelecting a waveband To switch between the FM memory banks FM1, FM2, FM3 and FMTSelecting the waveband/memory bank Band is displayedTuning into stations manually Tuning into a stationSetting the sensitivity of station seek tuning Automatic station seek tuningStoring stations automatically Travelstore Setting the scanning timeScanning receivable stations Scan Storing stationsDeactivating PTY Listening to stored stationsProgramme type PTY Activating PTYOptimising radio reception Selecting a programme type and starting seek tuningTreble reduction feature during interference HiCut Adjusting HiCutSwitching TIM on/off Switching TIM offTIM Traffic Information Memory Playing stored traffic announcements Switching TIM onRecording traffic announcements Selecting the TIM messageSelecting timers Setting the timerSetting the volume for traffic announcements Switching traffic information priority on/offTraffic information Starting CD mode, inserting a CD CD modeEjecting a CD Selecting tracksScanning tracks Scan Fast searching audibleRandom track play MIX Repeating tracks RepeatSwitching CD scrolling text on/off MP3 modeAdjusting the scrolling text Traffic announcements in CD modeD01 D02 Inserting/removing MMCs/SDsInserting an MMC/SD Switching to MMC/SD modeActivating the MP3 mode of CD Operation during the MP3 modeSelecting a track with the joystick Press the Next button 4to redisplay the MP3 main menuTrack from it MP3 main menuCancelling Scan and continuing listening to a track Configuring the displayRepeating individual tracks or whole directories Repeat Adjusting the scrolling text Press the softkey 5 with the display label Show ALLNext tracks are scanned in ascending order CD changer mode optional Switching to CD-changer modeSelecting CDs To stop the current track or current CD from being repeated Naming CDsRepeating individual tracks or whole CDs Repeat Repeat CD briefly appears on the dis- playCD names are deleted Deleting a CD nameCD name is deleted Deleting all CD namesSetting the date Setting the timeSetting the time automatically Setting the clock manuallyPermanent time display DSA Max Digital Sound AdjustmentSwitching DSA on/off Switching DSA offEQ 1 For the driver alone Switching DSA onAutomatically calibrating the equalizer To reactivate the equalizerManually changing the graphical equalizer Viewing vehicle acoustics with/ without equalizerPresettings for the following music styles are available Resetting the equalizerSelecting a sound presetting Preset After the calibration or the manual adjust- mentChanging the virtual distance of the loudspeakers Adjusting the stage effectSelecting a sound effect Selecting the stage effectSwitching DNC off Calibrating DNCStarting the DNC calibration To select a DNC increase Adjusting the subwoofer increaseSubwoofer and centre speaker Selecting a DNC increaseAdjusting the subwoofer phase position Setting the low-pass filterSetting the subsonic filter Adjusting high-pass filters for front/rear Adjusting the centre speakerTMC for dynamic navigation systems Crossover101 102 Switching the internal amplifier on/offAmplifier/Sub-Out External audio sourcesPress the softkey 5 with the display label AUX1 Switching the AUX input on/offBe selected using the Source button Naming the AUX inputDisplaying the serial number Resetting the deviceEntering a switch-on message MiscellaneousSpecifications 319 Gerätepass