Blaupunkt MP76 Radio mode, Adjusting the tuner, Setting the number of antennas

Page 16

Radio mode

Radio mode

This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY).

The station name appears on the display as soon as the tuner receives it. The pro- gramme type can be displayed upon re- quest. For further information, please read the section entitled "Programme type (PTY)".

Adjusting the tuner

To ensure proper functioning of the tuner, the device must be set for the region in which you are located. You can select be- tween Europe and America (USA). The tun- er is factory-set to the region in which it was sold. If you experience problems with your radio reception, please check this setting.

Press the MENU button 9.

Press the softkey 5 with the display label "TUNER".

Press the softkey 5 with the display label for the desired region, "AREA EUR" or "AREA USA".

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Setting the number of antennas

This device is equipped with two RDS radio receivers (TwinCeiver). You can connect one or two antennas to the device. If two antennas are used (strongly recommend- ed, the second antenna is part of the scope of delivery) a directional receiption of the station being received is possible in DDA radio mode. In most cases, the directional receiption signiﬁcantly improves the recep- tion quality.

Note:

To ensure proper functioning of the tuner, the main antenna must be con- nected to the bottom antenna socket.

To set the number of antennas,

press the MENU button 9.

Press the softkey 5 with the display label "TUNER".

Press the softkey 5 with the display label "ONE ANTE" if one antenna is con- nected to the device.

Or

Press the softkey 5 with the display label "TWO ANTE" if two antennas are connected to the device.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

68

Image 16

Contents Bremen MP76 Page Slot for MMC/SD CD mode VolumeDisplay MP3 mode Adjusting high-pass ﬁlters for Front/rearRepeating individual tracks or TMC for dynamic navigation SystemsRoad safety Safety noteInstallation Disposal of old unitActivating/deactivating demo mode Theft protectionDetachable control panel Detaching the control panelSwitching on/off Switching on/off using buttonSwitching on/off using the vehicle ignition Attaching the control panelVolume Setting the power-on volumeRisk of injury MuteNavigation audio Activating the navigation audioSound and volume relationship Adjusting the bassAdjusting the treble Adjusting the navigation minimum volumeSetting the left/right volume ratio balance Adjusting the front/rear volume ratio faderTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonAdjusting the viewing angle Setting the button illumination colourAdjusting the display brightness DisplaySelecting a preset colour Setting the display illumination colourMixing a colour for the display illumination Inverting display contents Adjusting the tuner Radio modeSetting the number of antennas Switching to radio mode Selecting static/dynamic radio mode FM onlyPRE mode static Digital Directional Antenna mode DDA staticSelecting the radio mode Switching the RDS function on/offSwitching REG on/off Convenient RDS functions AF, REGTo switch between the FM memory banks FM1, FM2, FM3 and FMT Selecting the waveband/memory bankBand is displayed Selecting a wavebandTuning into a station Setting the sensitivity of station seek tuningAutomatic station seek tuning Tuning into stations manuallySetting the scanning time Scanning receivable stations ScanStoring stations Storing stations automatically TravelstoreListening to stored stations Programme type PTYActivating PTY Deactivating PTYSelecting a programme type and starting seek tuning Treble reduction feature during interference HiCutAdjusting HiCut Optimising radio receptionSwitching TIM off Switching TIM on/offTIM Trafﬁc Information Memory Switching TIM on Recording trafﬁc announcementsSelecting the TIM message Playing stored trafﬁc announcementsSetting the timer Selecting timersSwitching trafﬁc information priority on/off Setting the volume for trafﬁc announcementsTrafﬁc information CD mode Ejecting a CDSelecting tracks Starting CD mode, inserting a CDFast searching audible Random track play MIXRepeating tracks Repeat Scanning tracks ScanMP3 mode Adjusting the scrolling textTrafﬁc announcements in CD mode Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Switching to MMC/SD mode Activating the MP3 mode of CDOperation during the MP3 mode Inserting an MMC/SDPress the Next button 4to redisplay the MP3 main menu Track from itMP3 main menu Selecting a track with the joystickConﬁguring the display Cancelling Scan and continuing listening to a trackRepeating individual tracks or whole directories Repeat Press the softkey 5 with the display label Show ALL Adjusting the scrolling textNext tracks are scanned in ascending order Switching to CD-changer mode CD changer mode optionalSelecting CDs Naming CDs Repeating individual tracks or whole CDs RepeatRepeat CD brieﬂy appears on the dis- play To stop the current track or current CD from being repeatedDeleting a CD name CD name is deletedDeleting all CD names CD names are deletedSetting the time Setting the time automaticallySetting the clock manually Setting the dateDSA Max Digital Sound Adjustment Switching DSA on/offSwitching DSA off Permanent time displaySwitching DSA on Automatically calibrating the equalizerTo reactivate the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerResetting the equalizer Selecting a sound presetting PresetAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableAdjusting the stage effect Selecting a sound effectSelecting the stage effect Changing the virtual distance of the loudspeakersCalibrating DNC Switching DNC offStarting the DNC calibration Adjusting the subwoofer increase Subwoofer and centre speakerSelecting a DNC increase To select a DNC increaseSetting the low-pass ﬁlter Adjusting the subwoofer phase positionSetting the subsonic ﬁlter Adjusting the centre speaker Adjusting high-pass ﬁlters for front/rearCrossover TMC for dynamic navigation systems101 Switching the internal ampliﬁer on/off Ampliﬁer/Sub-OutExternal audio sources 102Switching the AUX input on/off Be selected using the Source buttonNaming the AUX input Press the softkey 5 with the display label AUX1Resetting the device Entering a switch-on messageMiscellaneous Displaying the serial numberSpeciﬁcations 319 Gerätepass