Blaupunkt MP76 Selecting the waveband/memory bank, Band is displayed, Selecting a waveband

Page 19

Radio mode

press the TUNER button =or the OK Press the softkey 5 with the display

joystick 8.	label "SW" for the SW waveband.
The settings are saved.	The basic radio menu of the selected wave-
	band is displayed.

Selecting the waveband/memory bank

This device can receive programmes broad- cast over the FM frequency range as well as the MW, LW and SW (AM) wavebands. Four memory banks are available for the FM waveband and one memory bank each for the wavebands MW, LW and SW.

In dynamic radio mode, up to ﬁve levels are available.

Six stations can be stored in each memory bank.

Note:

If your device is set to the region USA, you can select between the wavebands FM and AM. In addition, the memory banks AM1, AM2, and AMT are avail- able for the AM waveband.

Selecting a waveband

To select an FM, MW, LW or SW waveband,

press the TUNER button = in radio mode.

The display shows the radio function menu.

Press the softkey 5 with the display label "BAND".

Press the softkey 5 with the display label "FM" for the FM waveband.

Press the softkey 5 with the display label "MW" for the MW waveband.

Press the softkey 5 with the display label "LW" for the LW waveband.

Selecting the FM memory bank

To switch between the FM memory banks FM1, FM2, FM3 and FMT,

press the NEXT button 4 repeatedly until the display shows the desired memory bank.

The memory banks are called in sequence from FM1 to FM2, FM3 and FMT.

Note:

If your device is set to the region USA and you selected the AM waveband, you can use the NEXT button 4to se- lect from the AM memory banks AM1, AM2 and AMT.

ENGLISH

71

Image 19

Contents Bremen MP76 Page Slot for MMC/SD CD mode VolumeDisplay TMC for dynamic navigation Systems MP3 modeAdjusting high-pass ﬁlters for Front/rear Repeating individual tracks orDisposal of old unit Road safetySafety note InstallationDetaching the control panel Activating/deactivating demo modeTheft protection Detachable control panelAttaching the control panel Switching on/offSwitching on/off using button Switching on/off using the vehicle ignitionMute VolumeSetting the power-on volume Risk of injuryActivating the navigation audio Navigation audioAdjusting the navigation minimum volume Sound and volume relationshipAdjusting the bass Adjusting the trebleTo adjust the fader, press the Audio button Setting the left/right volume ratio balanceAdjusting the front/rear volume ratio fader To adjust the balance, press the Audio buttonDisplay Adjusting the viewing angleSetting the button illumination colour Adjusting the display brightnessSelecting a preset colour Setting the display illumination colourMixing a colour for the display illumination Inverting display contents Adjusting the tuner Radio modeSetting the number of antennas Digital Directional Antenna mode DDA static Switching to radio modeSelecting static/dynamic radio mode FM only PRE mode staticConvenient RDS functions AF, REG Selecting the radio modeSwitching the RDS function on/off Switching REG on/offSelecting a waveband To switch between the FM memory banks FM1, FM2, FM3 and FMTSelecting the waveband/memory bank Band is displayedTuning into stations manually Tuning into a stationSetting the sensitivity of station seek tuning Automatic station seek tuningStoring stations automatically Travelstore Setting the scanning timeScanning receivable stations Scan Storing stationsDeactivating PTY Listening to stored stationsProgramme type PTY Activating PTYOptimising radio reception Selecting a programme type and starting seek tuningTreble reduction feature during interference HiCut Adjusting HiCutSwitching TIM off Switching TIM on/offTIM Trafﬁc Information Memory Playing stored trafﬁc announcements Switching TIM onRecording trafﬁc announcements Selecting the TIM messageSelecting timers Setting the timerSwitching trafﬁc information priority on/off Setting the volume for trafﬁc announcementsTrafﬁc information Starting CD mode, inserting a CD CD modeEjecting a CD Selecting tracksScanning tracks Scan Fast searching audibleRandom track play MIX Repeating tracks RepeatSwitching CD scrolling text on/off MP3 modeAdjusting the scrolling text Trafﬁc announcements in CD modeD01 D02 Inserting/removing MMCs/SDsInserting an MMC/SD Switching to MMC/SD modeActivating the MP3 mode of CD Operation during the MP3 modeSelecting a track with the joystick Press the Next button 4to redisplay the MP3 main menuTrack from it MP3 main menuConﬁguring the display Cancelling Scan and continuing listening to a trackRepeating individual tracks or whole directories Repeat Press the softkey 5 with the display label Show ALL Adjusting the scrolling textNext tracks are scanned in ascending order Switching to CD-changer mode CD changer mode optionalSelecting CDs To stop the current track or current CD from being repeated Naming CDsRepeating individual tracks or whole CDs Repeat Repeat CD brieﬂy appears on the dis- playCD names are deleted Deleting a CD nameCD name is deleted Deleting all CD namesSetting the date Setting the timeSetting the time automatically Setting the clock manuallyPermanent time display DSA Max Digital Sound AdjustmentSwitching DSA on/off Switching DSA offEQ 1 For the driver alone Switching DSA onAutomatically calibrating the equalizer To reactivate the equalizerManually changing the graphical equalizer Viewing vehicle acoustics with/ without equalizerPresettings for the following music styles are available Resetting the equalizerSelecting a sound presetting Preset After the calibration or the manual adjust- mentChanging the virtual distance of the loudspeakers Adjusting the stage effectSelecting a sound effect Selecting the stage effectCalibrating DNC Switching DNC offStarting the DNC calibration To select a DNC increase Adjusting the subwoofer increaseSubwoofer and centre speaker Selecting a DNC increaseSetting the low-pass ﬁlter Adjusting the subwoofer phase positionSetting the subsonic ﬁlter Adjusting high-pass ﬁlters for front/rear Adjusting the centre speakerCrossover TMC for dynamic navigation systems101 102 Switching the internal ampliﬁer on/offAmpliﬁer/Sub-Out External audio sourcesPress the softkey 5 with the display label AUX1 Switching the AUX input on/offBe selected using the Source button Naming the AUX inputDisplaying the serial number Resetting the deviceEntering a switch-on message MiscellaneousSpeciﬁcations 319 Gerätepass