Blaupunkt MP76 Tuning into a station, Setting the sensitivity of station seek tuning

Radio mode

Tuning into a station

There are various ways of tuning into a sta- tion.

Automatic station seek tuning

￿Move the joystick 8up or down.

The radio tunes into the next receivable sta- tion.

Tuning into stations manually

You can also tune into stations manually.

Note:

You can only tune into stations manu- ally if the RDS function is deactivated.

￿Move the joystick 8to the left or the right.

Browsing through broadcasting networks (FM only)

If a radio station provides several pro- grammes, you have the option of browsing through its so-called "broadcasting net- work".

Note:

The convenient RDS function must be activated before you can use this fea- ture. When using this feature, you will only be able to switch to stations that you have received once before already.

￿Move the joystick 8to the left or the right.

Setting the sensitivity of station seek tuning

You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into those with a weak reception.

￿press the TUNER button = in radio mode.

The display shows the radio function menu.

￿Press the NEXT button 4.

Note:

If you call up the radio function menu in the MW or LW radio mode, the softkey with the display label "SENS" is on the first page.

￿Press the softkey 5 with the display label "SENS".

￿Press the softkey 5 with the display label "FM" or "AM" to set the sensitivity for "FM" or "AM".

￿Move the joystick 8 up or right or down or left to set the sensitivity.

You can adjust the sensitivity in increments from 1 to 6. "Sensitivity 1" is the lowest, "Sensitivity 6" the highest sensitivity for very remote stations.

￿Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

72