Blaupunkt MP76 operating instructions Automatically calibrating the equalizer, Switching DSA on

Page 41

DSC Max – Equalizer

Switching DSA on

To reactivate the equalizer,

press and hold the AUDIO button : for longer than two seconds.

The display shows the DSA menu.

Press the softkey 5 with the display label "USER EQ".

Select an equalizer setting.

Automatically calibrating the equalizer

You can perform and save electronic cali- brations for three different situations (not possible if crossover is set), e.g.:

EQ 1 For the driver alone

EQ 2 For the driver and front passenger EQ 3 For the front and rear occupants

Hold the microphone in the appropriate po- sition while the calibration is taking place.

The position of the calibration microphone for Situation 1 (e.g. for the driver alone) is at the height of the driver’s head, approx. 10 centimetres next to the right ear.

For Situation 2, the calibration microphone should be positioned at head height be- tween the driver and the front passenger.

For Situation 3, you should position the calibration microphone at head height in the centre of the vehicle interior (left/right, front/rear).

Really quiet surroundings are required for the calibration. Any extraneous noise will distort the measured values. lose all win- dows, doors, and the sliding sunroof during the calibration. You should be sitting in the driver's seat.

Note:

The sound radiating from the loud- speakers must not be obstructed by any objects. All the loudspeakers must be connected. The calibration micro- phone must be connected to the de- vice, the calibration of the equalizer should be performed before the DNC calibration.

To calibrate an equalizer,

press and hold the AUDIO button : for longer than two seconds.

Press the softkey 5 with the display label "USER EQ".

Press the softkey 5 with the display label of the equalizer ("EQ-1", "EQ-2" or "EQ-3") to be calibrated.

Press the softkey 5 with the display label "ADJUST".

Press the softkey 5 with the display label "AUTO ADJ".

A countdown is running on the display. Dur- ing this time, you can position the calibra- tion microphone. After the countdown ex- pires, the calibration is performed.

Use the same procedure for all equal- izers.

After the calibration is complete, the menu of the selected equalizer is displayed again.

ENGLISH

93

Image 41

Contents Bremen MP76 Page Slot for MMC/SD Display VolumeCD mode Adjusting high-pass ﬁlters for Front/rear MP3 modeRepeating individual tracks or TMC for dynamic navigation SystemsSafety note Road safetyInstallation Disposal of old unitTheft protection Activating/deactivating demo modeDetachable control panel Detaching the control panelSwitching on/off using button Switching on/offSwitching on/off using the vehicle ignition Attaching the control panelSetting the power-on volume VolumeRisk of injury MuteActivating the navigation audio Navigation audioAdjusting the bass Sound and volume relationshipAdjusting the treble Adjusting the navigation minimum volumeAdjusting the front/rear volume ratio fader Setting the left/right volume ratio balanceTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonSetting the button illumination colour Adjusting the viewing angleAdjusting the display brightness DisplayMixing a colour for the display illumination Setting the display illumination colourSelecting a preset colour Inverting display contents Setting the number of antennas Radio modeAdjusting the tuner Selecting static/dynamic radio mode FM only Switching to radio modePRE mode static Digital Directional Antenna mode DDA staticSwitching the RDS function on/off Selecting the radio modeSwitching REG on/off Convenient RDS functions AF, REGSelecting the waveband/memory bank To switch between the FM memory banks FM1, FM2, FM3 and FMTBand is displayed Selecting a wavebandSetting the sensitivity of station seek tuning Tuning into a stationAutomatic station seek tuning Tuning into stations manuallyScanning receivable stations Scan Setting the scanning timeStoring stations Storing stations automatically TravelstoreProgramme type PTY Listening to stored stationsActivating PTY Deactivating PTYTreble reduction feature during interference HiCut Selecting a programme type and starting seek tuningAdjusting HiCut Optimising radio receptionTIM Trafﬁc Information Memory Switching TIM on/offSwitching TIM off Recording trafﬁc announcements Switching TIM onSelecting the TIM message Playing stored trafﬁc announcementsSelecting timers Setting the timerTrafﬁc information Setting the volume for trafﬁc announcementsSwitching trafﬁc information priority on/off Ejecting a CD CD modeSelecting tracks Starting CD mode, inserting a CDRandom track play MIX Fast searching audibleRepeating tracks Repeat Scanning tracks ScanAdjusting the scrolling text MP3 modeTrafﬁc announcements in CD mode Switching CD scrolling text on/offD01 D02 Inserting/removing MMCs/SDsActivating the MP3 mode of CD Switching to MMC/SD modeOperation during the MP3 mode Inserting an MMC/SDTrack from it Press the Next button 4to redisplay the MP3 main menuMP3 main menu Selecting a track with the joystickRepeating individual tracks or whole directories Repeat Cancelling Scan and continuing listening to a trackConﬁguring the display Next tracks are scanned in ascending order Adjusting the scrolling textPress the softkey 5 with the display label Show ALL Selecting CDs CD changer mode optionalSwitching to CD-changer mode Repeating individual tracks or whole CDs Repeat Naming CDsRepeat CD brieﬂy appears on the dis- play To stop the current track or current CD from being repeatedCD name is deleted Deleting a CD nameDeleting all CD names CD names are deletedSetting the time automatically Setting the timeSetting the clock manually Setting the dateSwitching DSA on/off DSA Max Digital Sound AdjustmentSwitching DSA off Permanent time displayAutomatically calibrating the equalizer Switching DSA onTo reactivate the equalizer EQ 1 For the driver aloneManually changing the graphical equalizer Viewing vehicle acoustics with/ without equalizerSelecting a sound presetting Preset Resetting the equalizerAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableSelecting a sound effect Adjusting the stage effectSelecting the stage effect Changing the virtual distance of the loudspeakersStarting the DNC calibration Switching DNC offCalibrating DNC Subwoofer and centre speaker Adjusting the subwoofer increaseSelecting a DNC increase To select a DNC increaseSetting the subsonic ﬁlter Adjusting the subwoofer phase positionSetting the low-pass ﬁlter Adjusting high-pass ﬁlters for front/rear Adjusting the centre speaker101 TMC for dynamic navigation systemsCrossover Ampliﬁer/Sub-Out Switching the internal ampliﬁer on/offExternal audio sources 102Be selected using the Source button Switching the AUX input on/offNaming the AUX input Press the softkey 5 with the display label AUX1Entering a switch-on message Resetting the deviceMiscellaneous Displaying the serial numberSpeciﬁcations 319 Gerätepass