Blaupunkt MP76 Fast searching audible, Random track play MIX, Repeating tracks Repeat

Page 29

CD mode

Fast searching (audible)

To fast search backwards or forwards,

￿hold the joystick 8 pressed in one direction (up and right for forwards or down and left for backwards) until fast searching starts.

Random track play (MIX)

￿Press the softkey 5 with the display label "MIX".

"MIX CD" briefly appears on the display. The next track being played is randomly se- lected.

Cancelling MIX

￿Press the softkey 5 with the display label "MIX" again.

"MIX OFF" briefly appears on the display.

Repeating tracks (REPEAT)

￿Press the softkey 5 with the display label "REPEAT".

"REPEAT TRACK" briefly appears on the display. The track is repeated continuously until you deactivate REPEAT.

Cancelling Repeat

￿Press the softkey 5 with the display label "REPEAT" again.

"REPEAT OFF" briefly appears on the dis- play. Normal playback is then resumed.

Scanning tracks (SCAN)

You can scan (briefly play) all the tracks on the CD.

￿ Press and hold down the OK joystick

8for longer than two seconds.

ENGLISH

The next titles of the CD are scanned in as-

 

cending order.

 

Note:

 

 

You can set the scanning time. For

 

further information, please read the

 

section entitled "Setting the scanning

 

time" in the "Radio mode" chapter.

 

Cancelling Scan and continuing listening

 

to a track

 

To end the scanning process,

 

￿ press the OK joystick 8.

 

The currently scanned track will then con-

 

tinue to be played normally.

 

Displaying CD text

 

Some CDs include CD text. The CD text

 

might contain the names of the artist, al-

 

bum and tracks.

 

You can allow the CD text to be displayed as

 

scrolling text in the bottom line every time

 

you switch to another track.

 

If the inserted CD does not contain CD text,

 

"NO TEXT" is briefly shown on the display

 

with CD text switched on.

 

Switching CD text on/off

￿Press the softkey 5 with the display label "TEXT" repeatedly until "CD TEXT ON" or "CD TEXT OFF" appears.

81

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Bremen MP76 Page Slot for MMC/SD Display VolumeCD mode Adjusting high-pass filters for Front/rear MP3 modeRepeating individual tracks or TMC for dynamic navigation SystemsSafety note Road safetyInstallation Disposal of old unitTheft protection Activating/deactivating demo modeDetachable control panel Detaching the control panelSwitching on/off using button Switching on/offSwitching on/off using the vehicle ignition Attaching the control panelSetting the power-on volume VolumeRisk of injury MuteActivating the navigation audio Navigation audioAdjusting the bass Sound and volume relationshipAdjusting the treble Adjusting the navigation minimum volumeAdjusting the front/rear volume ratio fader Setting the left/right volume ratio balanceTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonSetting the button illumination colour Adjusting the viewing angleAdjusting the display brightness DisplayMixing a colour for the display illumination Setting the display illumination colourSelecting a preset colour Inverting display contents Setting the number of antennas Radio modeAdjusting the tuner Selecting static/dynamic radio mode FM only Switching to radio modePRE mode static Digital Directional Antenna mode DDA staticSwitching the RDS function on/off Selecting the radio modeSwitching REG on/off Convenient RDS functions AF, REGSelecting the waveband/memory bank To switch between the FM memory banks FM1, FM2, FM3 and FMTBand is displayed Selecting a wavebandSetting the sensitivity of station seek tuning Tuning into a stationAutomatic station seek tuning Tuning into stations manuallyScanning receivable stations Scan Setting the scanning timeStoring stations Storing stations automatically TravelstoreProgramme type PTY Listening to stored stationsActivating PTY Deactivating PTYTreble reduction feature during interference HiCut Selecting a programme type and starting seek tuningAdjusting HiCut Optimising radio receptionTIM Traffic Information Memory Switching TIM on/offSwitching TIM off Recording traffic announcements Switching TIM onSelecting the TIM message Playing stored traffic announcementsSelecting timers Setting the timerTraffic information Setting the volume for traffic announcementsSwitching traffic information priority on/off Ejecting a CD CD modeSelecting tracks Starting CD mode, inserting a CDRandom track play MIX Fast searching audibleRepeating tracks Repeat Scanning tracks ScanAdjusting the scrolling text MP3 modeTraffic announcements in CD mode Switching CD scrolling text on/offD01 D02 Inserting/removing MMCs/SDsActivating the MP3 mode of CD Switching to MMC/SD modeOperation during the MP3 mode Inserting an MMC/SDTrack from it Press the Next button 4to redisplay the MP3 main menuMP3 main menu Selecting a track with the joystickRepeating individual tracks or whole directories Repeat Cancelling Scan and continuing listening to a trackConfiguring the display Next tracks are scanned in ascending order Adjusting the scrolling textPress the softkey 5 with the display label Show ALL Selecting CDs CD changer mode optionalSwitching to CD-changer mode Repeating individual tracks or whole CDs Repeat Naming CDsRepeat CD briefly appears on the dis- play To stop the current track or current CD from being repeatedCD name is deleted Deleting a CD nameDeleting all CD names CD names are deletedSetting the time automatically Setting the timeSetting the clock manually Setting the dateSwitching DSA on/off DSA Max Digital Sound AdjustmentSwitching DSA off Permanent time displayAutomatically calibrating the equalizer Switching DSA onTo reactivate the equalizer EQ 1 For the driver aloneManually changing the graphical equalizer Viewing vehicle acoustics with/ without equalizerSelecting a sound presetting Preset Resetting the equalizerAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableSelecting a sound effect Adjusting the stage effectSelecting the stage effect Changing the virtual distance of the loudspeakersStarting the DNC calibration Switching DNC offCalibrating DNC Subwoofer and centre speaker Adjusting the subwoofer increaseSelecting a DNC increase To select a DNC increaseSetting the subsonic filter Adjusting the subwoofer phase positionSetting the low-pass filter Adjusting high-pass filters for front/rear Adjusting the centre speaker101 TMC for dynamic navigation systemsCrossover Amplifier/Sub-Out Switching the internal amplifier on/offExternal audio sources 102Be selected using the Source button Switching the AUX input on/offNaming the AUX input Press the softkey 5 with the display label AUX1Entering a switch-on message Resetting the deviceMiscellaneous Displaying the serial numberSpecifications 319 Gerätepass
Top Page Image Contents