TIM – Traffic Information Memory
Note:
If you do not switch on the device for more than 72 hours, the TIM function is automatically switched off.
Switching TIM on
If you want to switch TIM on again,
in radio mode, hold the TUNER button = pressed for longer than two sec- onds.
The TIMPLAY menu is displayed.
Press the NEXT button 4. The TIMSET menu again.
Press the softkey 5 with the display label "TIM ON" repeatedly until "TIM RECORD ON" appears on the display.
Press the TUNER button =or the OK joystick 8.
The settings are saved.
Note:
After switching off the device with the vehicle ignition or the button 1, the current status "TIM ON" or "TIM OFF" briefly appears on the display.
If traffic announcements were recorded, the last message is played. The most cur- rent message has the number "TIM1". The station name/frequency appears in the top line of the display and the time of the re- cording below it. After the first message, all additional messages are played in ascend- ing order.
If no messages are recorded, "NO TIM AVAILABLE" briefly appears on the display.
After the last message, the system switches back to the previous operating mode.
If you want to return to the radio mode with- out first listening to all messages,
press the TUNER button =or the OK joystick 8.
Selecting the TIM message
"TIM" and the number of the message ap- pear next to the top two softkeys on both sides of the display.
If you want to listen to one of the displayed messages without playing the other mes- sages:
Press the softkey 5 with the corre- sponding display label "TIM1", "TIM2", "TIM3" or "TIM4".
ENGLISH
Playing stored traffic announcements
To play the stored traffic announcements,
in radio mode, hold the TUNER button = pressed for longer than two sec- onds.
The TIMPLAY menu is displayed.
Recording traffic announcements
If the device is switched on, traffic an- nouncements are automatically recorded if a traffic information station is received and the priority for traffic announcements is switched on.
77