Blaupunkt MP76 Switching on/off using button, Attaching the control panel

Page 8

Theft protection

Switching on/off

￿Press the button 3.

The locking mechanism of the control panel is unlocked.

￿Pull the control panel straight out of the device and to the left.

Notes:

After removing the control panel from the device, the device switches off.

All the current settings are saved.

Any CD already inserted in the de- vice remains there.

Switching on/off

There are various ways of switching the de- vice on/off:

Switching on/off using button 1

￿To switch on the device, press button

1.

The device switches on.

￿To switch off the device, press and hold down button 1 for longer than two seconds.

The device is switched off.

Attaching the control panel

￿Push the control panel into the guides of the device from the left to the right.

￿Carefully push the left side of the con- trol panel into the device until it clicks into place.

Note:

When attaching the control panel, make sure you do not push on the display.

Switching on/off using the vehicle ignition

The device will switch on/off simultaneous- ly with the ignition if the device is correctly connected to the vehicle’s ignition and you did not switch the device off by pressing button 1.

The device can also be switched on with switched-off ignition.

￿Press the button 1.

Note:

To protect the vehicle battery, the de- vice will switch off automatically after one hour if the ignition is off.

60

Image 8
Contents Bremen MP76 Page Slot for MMC/SD Display VolumeCD mode MP3 mode Adjusting high-pass filters for Front/rearRepeating individual tracks or TMC for dynamic navigation SystemsRoad safety Safety noteInstallation Disposal of old unitActivating/deactivating demo mode Theft protectionDetachable control panel Detaching the control panelSwitching on/off Switching on/off using buttonSwitching on/off using the vehicle ignition Attaching the control panelVolume Setting the power-on volumeRisk of injury MuteNavigation audio Activating the navigation audioSound and volume relationship Adjusting the bassAdjusting the treble Adjusting the navigation minimum volumeSetting the left/right volume ratio balance Adjusting the front/rear volume ratio faderTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonAdjusting the viewing angle Setting the button illumination colourAdjusting the display brightness DisplayMixing a colour for the display illumination Setting the display illumination colourSelecting a preset colour Inverting display contents Setting the number of antennas Radio modeAdjusting the tuner Switching to radio mode Selecting static/dynamic radio mode FM onlyPRE mode static Digital Directional Antenna mode DDA staticSelecting the radio mode Switching the RDS function on/offSwitching REG on/off Convenient RDS functions AF, REGTo switch between the FM memory banks FM1, FM2, FM3 and FMT Selecting the waveband/memory bankBand is displayed Selecting a wavebandTuning into a station Setting the sensitivity of station seek tuningAutomatic station seek tuning Tuning into stations manuallySetting the scanning time Scanning receivable stations ScanStoring stations Storing stations automatically TravelstoreListening to stored stations Programme type PTYActivating PTY Deactivating PTYSelecting a programme type and starting seek tuning Treble reduction feature during interference HiCutAdjusting HiCut Optimising radio receptionTIM Traffic Information Memory Switching TIM on/offSwitching TIM off Switching TIM on Recording traffic announcementsSelecting the TIM message Playing stored traffic announcementsSetting the timer Selecting timersTraffic information Setting the volume for traffic announcementsSwitching traffic information priority on/off CD mode Ejecting a CDSelecting tracks Starting CD mode, inserting a CDFast searching audible Random track play MIXRepeating tracks Repeat Scanning tracks ScanMP3 mode Adjusting the scrolling textTraffic announcements in CD mode Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Switching to MMC/SD mode Activating the MP3 mode of CDOperation during the MP3 mode Inserting an MMC/SDPress the Next button 4to redisplay the MP3 main menu Track from itMP3 main menu Selecting a track with the joystickRepeating individual tracks or whole directories Repeat Cancelling Scan and continuing listening to a trackConfiguring the display Next tracks are scanned in ascending order Adjusting the scrolling textPress the softkey 5 with the display label Show ALL Selecting CDs CD changer mode optionalSwitching to CD-changer mode Naming CDs Repeating individual tracks or whole CDs RepeatRepeat CD briefly appears on the dis- play To stop the current track or current CD from being repeatedDeleting a CD name CD name is deletedDeleting all CD names CD names are deletedSetting the time Setting the time automaticallySetting the clock manually Setting the dateDSA Max Digital Sound Adjustment Switching DSA on/offSwitching DSA off Permanent time displaySwitching DSA on Automatically calibrating the equalizerTo reactivate the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerResetting the equalizer Selecting a sound presetting PresetAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableAdjusting the stage effect Selecting a sound effectSelecting the stage effect Changing the virtual distance of the loudspeakersStarting the DNC calibration Switching DNC offCalibrating DNC Adjusting the subwoofer increase Subwoofer and centre speakerSelecting a DNC increase To select a DNC increaseSetting the subsonic filter Adjusting the subwoofer phase positionSetting the low-pass filter Adjusting the centre speaker Adjusting high-pass filters for front/rear101 TMC for dynamic navigation systemsCrossover Switching the internal amplifier on/off Amplifier/Sub-OutExternal audio sources 102Switching the AUX input on/off Be selected using the Source buttonNaming the AUX input Press the softkey 5 with the display label AUX1Resetting the device Entering a switch-on messageMiscellaneous Displaying the serial numberSpecifications 319 Gerätepass