Volume Control
To increase or decrease the volume of the handset alerter or the receiver (earpiece):
■Alerter: Press the “+” or the “– ” button while the MDW 9030P is awake but turned off. If the display is dark (the phone is in "sleep" mode), press "to wake it up, then press the “+” or the “– ” button.
■Receiver: Press the “+” or the “– ” button while the MDW 9030P is turned on.
+ –
+ and – Volume Control Buttons
Lanyard Loop
Carrying Your Pocketphone
The MDW 9030P Pocketphone has a loop in the upper corner to accommodate the included lanyard. You can attach the lanyard, as illustrated above, and slip the lanyard over your wrist to guard against dropping the phone. A leather carrying case is also available separately (see "Ordering Replacement & Optional Parts" in Chapter 4).
The MDW 9030P Pocketphone also comes with a detachable clip, which you can attach to the back of the battery pack, that enables you to attach the phone to your belt or purse strap. To attach the clip to the battery pack, do the following:
1Remove the battery pack from the hand- set, as described in "Inserting and
Removing the Handset's Battery Pack" in
Chapter 2.
2Place the two metal tabs on the clip into the slots on the battery pack, with the
"hooks" toward the bottom of the battery pack.
3
Slide the clip toward the bottom of the battery pack to engage the hooks.
4 | Reinsert the battery pack in the handset, | |
as described in "Inserting and Removing | ||
| ||
the Handset's Battery Pack" in Chapter 2. | ||
| Using the MDW 9030P Pocketphone | |