"Waking Up" the Phone
In addition to "On" and "Off," the MDW 9030P has an
The Oand "buttons "wake up" the phone. The headset and handset O buttons turn the phone on, and the Select button (") signals the phone that activity is occurring. You can activate the display to see whether you have a message or to check whether your alerter is enabled without actually turning the phone on (if the communica- tions system is very busy, for instance) by pressing ".
Making a Call
To make a call using your MDW 9030P, use the following procedure:
1.Press the handset Obutton (or the headset Obutton if you have the headset attached) to turn the phone on.
–The MDW 9030P seizes an available line and a truncated triangle or a small rect- angle (depending on your communications system) appears around that line in the handset display.
–You hear a dial tone.
2.Dial the call as you would on a wired system phone.
3.To end the call, press the Obutton.
After 15 seconds, unless there is other activity on the phone, the handset goes into the
Answering a Call
When you receive a call on your MDW 9030P Pocketphone, you hear a ringing tone if your alerter is enabled, or you feel a vibration in the handset if the vibrator is enabled, or both. To answer the call, use the following procedure:
1.Press the handset Obutton (or the headset Obutton if you have the headset attached) to turn the phone on.
You are automatically connected to the ringing line.
4.Speak into the handset to converse with your caller.
5.To end the call, press the Obutton.
After 15 seconds, unless there is other activity on the phone, the handset goes into the