Lucent Technologies Transtalk 9000 manual Battery Charger Problems

Page 90

Battery Charger Problems (continued)

Symptom

Possible Causes

Possible Solutions

 

 

 

SPARE LED on battery

The battery pack is not

Reseat the battery pack in the

charger does not light

seated properly in Spare

battery charger’s Spare battery

when the battery pack is

battery compartment.

compartment.

placed in Spare battery

 

 

The contacts on the battery

1. Verify that there are no

compartment.

 

pack or in the Spare

obstructions on the battery

 

battery compartment are

pack or battery charger

 

dirty.

contacts.

 

 

2. Unplug the charger and

 

 

clean the contacts with a soft

 

 

eraser.

 

 

3. Clean the battery pack

 

 

contacts with a soft eraser.

 

 

 

 

The battery pack is defec-

1. Insert the questionable battery

 

tive.

pack in the handset and place

 

 

the handset in the handset

 

 

cradle.

 

 

2. Wait one minute. If the HAND-

 

 

SET LED flashes red, order a

 

 

new battery pack.

 

 

 

Troubleshooting 5-15

Image 90
Contents TransTalk Digital Wireless System Trademarks Contents Using the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone IiiPage TransTalk 9000 System What Is a Wireless Phone?About TransTalk 9000 Products IntroductionSingle Carrier Installation 2IntroductionWhere Can You Use Your Pocketphone? About the MDW 9030P PocketphonePrivacy Information Parts List 4IntroductionAdditional Parts Rubber FeetSpare Battery and Headset 6IntroductionImportant Safety Instructions Installing the MDW 9030P PocketphoneExposure to Radio Frequency Energy 2Installing the MDW 9030P PocketphoneGuidelines for Safe and Efficient Operation Cardiac PacemakersBasic Safety Precautions for Installation and Use Additional Safety Instructions for Installation Personnel 4Installing the MDW 9030P PocketphoneAC Outlet Check 6Installing the MDW 9030P Pocketphone Radio Modules and CarriersKey Components Pass8Installing the MDW 9030P Pocketphone Positioning a Radio Module or Carriers General Positioning Rules10Installing the MDW 9030P Pocketphone Additional Rules for Installing a Single Radio Module OnlyWireless Test Mode 12Installing the MDW 9030P Pocketphone Display Number Signal Strength IsInstalling a Single Radio Module 14Installing the MDW 9030P Pocketphone Setting the Power Level 16Installing the MDW 9030P Pocketphone Desired Range ApproximateSetting the Control/Expansion DIP Switch Installing a Single Carrier on a Shelf or Desk 18Installing the MDW 9030P PocketphoneMusic 20Installing the MDW 9030P Pocketphone OUTInstalling a Single Carrier on a Wall 22Installing the MDW 9030P Pocketphone Book Installing Multiple Carriers 24Installing the MDW 9030P PocketphoneCarrier, doing so causes all handsets to work 26Installing the MDW 9030P Pocketphone Music 28Installing the MDW 9030P Pocketphone If the carriers are plugged into ThenInstallation Self-Test Inserting and Removing Handset’s Battery Pack 30Installing the MDW 9030P PocketphoneHandset Changing the Communications System Setting MAPM232Installing the MDW 9030P Pocketphone Filling Out the Handset LabelBattery Charger Positioning the Battery ChargerInstalling the Battery Charger 34Installing the MDW 9030P Pocketphone Inserting a Battery Pack into the Spare Battery Compartment Removing a Battery Pack From the Spare Battery CompartmentInserting the Handset into Battery Chargers Handset Cradle 36Installing the MDW 9030P PocketphoneRemoving the Handset from the Handset Cradle Using the MDW 9030P Pocketphone Using the MDW 9030P Pocketphone2Using the MDW 9030P Pocketphone Handset ControlsColumn and Select Buttons 4Using the MDW 9030P Pocketphone Handset DisplayLine Status Indicators Display MessagesRange Indicators Low Battery Indicator6Using the MDW 9030P Pocketphone Volume Control Carrying Your Pocketphone8Using the MDW 9030P Pocketphone Changing the Handset SettingsChanging the Communications System Button Mapping Setting AntennaEnabling or Disabling the Vibrator Enabling or Disabling Line Preselection10Using the MDW 9030P Pocketphone Enabling or Disabling the Alerter Using Local Test Mode 12Using the MDW 9030P PocketphoneTest Modes Using Wireless Test Mode 14Using the MDW 9030P Pocketphone Performance/Range Test in Wireless Test ModeWaking Up the Phone Making a CallAnswering a Call 16Using the MDW 9030P Pocketphone Manually Selecting a Line or Programmed ButtonPreselecting a Line Using a Headset Using the Headset On/Off ButtonAnswering Calls with a Headset 18Using the MDW 9030P Pocketphone Placing Calls with a HeadsetBattery Charger Battery Charger Features20Using the MDW 9030P Pocketphone Extending Battery Life 22Using the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone2Maintaining the MDW 9030P Pocketphone Swapping Extensions ReplacingtheAntenna 4Maintaining the MDW 9030P PocketphoneOrdering Replacement & Optional Parts Procedures InstallationProblemsTroubleshooting 2Troubleshooting Power and PassPower and Pass LEDs on Handset Problems 4TroubleshootingHandset Problems Battery Problems 6TroubleshootingVoice Quality Problems For a multiple-carrier installation8Troubleshooting PARTNER, Part Range Problems 10TroubleshootingRange Problems 12Troubleshooting Placed on HoldBattery Charger Problems Handset LED on14Troubleshooting Battery Charger Problems 16Troubleshooting MDW9030PPocketphoneCompatibility MDW 9030P Pocketphone Compatibility2MDW 9030P Pocketphone Compatibility Communications System Compatibility Partner Systems Button Mapping for Partner SystemsSetting the Line-Ringing Options 4MDW 9030P Pocketphone CompatibilityMerlin Systems 6MDW 9030P Pocketphone Compatibility Recall DropButton Mapping for Merlin 410 and Merlin 820 Systems DropSetting the Line Ringing Options 8MDW 9030P Pocketphone CompatibilitySystem 25, System 75, System Definity Systems Definity G1 R1V410MDW 9030P Pocketphone Compatibility DropScroll Display 12MDW 9030P Pocketphone Compatibility Lucent Technologies Limited Warranty Limitation of Liability Warranty and Repair Information A-1Repair Information In-Warranty Repairs2Warranty and Repair Information Limitation of LiabilityPost-WarrantyRepairs Warranty and Repair Information A-3Hearing Aid Compatibility FCC Part 15 RulesIC RSS-210 Compliance Regulatory Information B-1Specifications Specifications C-12Specifications PowerIndex Index IN-1IN-2 Index Index IN-3 No LinkIN-4 Index Battery Charger Wall-Mounting Template Lucent Technologies Comcode Issue March