Philips SRU 7140 user manual Using the Shift key, Source selection keys, Mute

SRU7140_10 03-07-2007 09:53 Pagina 5

	User Manual
9 AV	- switches between external
	(audio / video) inputs of your
	equipment (TV, STB).
	- picture setting options
	(TV, STB)
0	sound setting options
	(TV, STB)
!	selects between one- and two-
	figure channel numbers
	(TV, STB).
@ Number keys	for direct channel selection
	(TV, STB, AMP).
Source selection keys	select TV, DVD,VCR,TUNER,
	CD, AUX or HDD (Hard Disk
	Drive) mode (AMP).
# LEARN	sets up learning functions.
$ 0	- record. Press twice to start
	recording. For some brands,
	press once, then press again
	for three seconds.
	- selects previous channel.
% BACK	- jumps back one level in the
	menu or turns off the menu
	(TV, STB, DVD).
	- turns Teletext off.
^ SELECT	selects TV, DVD, STB or AMP
	mode.
& PROG(ram) +/-	selects next / previous channel
	(TV, STB).
* FAV	selects next / previous favorite
	station (TV, STB).
	stops at the current Teletext
	picture (TV, STB).
	selects wide screen TV (TV,
	STB).
( C	clears entries (TV, STB, DVD)
(Mute)	turns off the TV sound.

Using the Shift key

The SHIFT key is used to access additional functions for the current device mode e.g. Menu, Exit, cursor, etc.

Not all codes have shifted functions.To access additional functions:

1Press SELECT to select the desired device mode (TV, DVD,

STB or AMP).

–The device mode indicator lights up in the selector window.

2 Press and release SHIFT.

–The device mode indicator remains lit to indicate shifted mode.

3Press other keys to find out which functions are available for the selected device mode.

Only functions featured on the original remote control are available.

4Press and release SHIFT to switch back to normal mode.

–If no key is pressed in shift mode, the remote control returns to normal (non-shifted) mode after 20 seconds.

English

5