Way Radio Options | Motorola i860 instruction

BASIC LEVEL CHECKS AND SELF TESTS: Self-Test Procedures

•Auto Ans — sets your phone to automatically answer an incoming call after a specified number of rings. When this feature is on, the phone answers by connecting you to the caller; it does not send the call to voice mail, unless you are out of coverage or on the line.

•Flip Activation — User can set the flip opening to answer and/or end a call.

Settings > Phone Calls > Flip Activation > OK > Flip to Ans. Settings > Phone Calls > Flip Activation > OK > Flip to End.

•Minute Beep — causes beep to sound every minute of an active call.

•CallDuration — causes the duration of a call to appear on the phones display when the call ends.

•TTY — lets you use your phone with a TTY device. To use your phone to make phone calls using a teletypewriter (TTY) device:

1.Connect one end of a 2.5 mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device.

2.Make sure that your phone’s TTY feature is on and select the TTY mode you want to use.

3.Use your phone to enter phone numbers and make calls.

•Notifications —To control whether your phone sounds message notification tones while you are on phone calls:

1.From the main menu, select Settings > Phone Calls > Notifications.

2.Choose the option you want:

Receive All — Tones sound during calls for all types of messages.

Msg Mail Only — Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls.

Delay All—Tones for all types of messages are held until you end calls.

3.Press O.

Tip: To set notifications options during a call: Press O. Select Notifications.

2-Way Radio Options

The Two-Way Radio menu controls how your phone handles Direct Connect (DC) and Group Connect (GC):

•Tkgroup Silent — controls whether you hear group calls or call alerts to your Talkgroup. To receive group calls made to a Talkgroup, you must join the Talkgroup. You can belong to only one Talkgroup at a time. When you join a new Talkgroup, you no long belong to your previous Talkgroup. To join a Talkgroup:

1.Press #. Then enter the Talkgroup number using the keypad. -or-

2.Choose the Talkgroup name from Contacts or recent calls list.

•Tkgroup Area — lets you name Talkgroups and choose your Talkgroup area.

•One Touch PTT — One Touch PTT sets your phone to call the most recent Private ID on the recent calls list, or to a Private ID you choose, every time you press the PTT button. To set your phone to call the most recent Private ID on the recent calls list:

1.From the main menu, select Settings > DC/GC Options > One Touch DC.

68P80400P73-A

5-9