12.Attach the Front Weight Guides (136) to the Right
Top Frame (7) with two M10 x 38mm Screws (82) and two M10 Washers (116).
Repeat this step with the Rear Weight Guides (24).
13.Orient the Butterfly Frame (22) as shown. Attach the Butterfly Frame to the Right Upright (4) with two M8 x 72ram Bolts (91), two M8 Washers (117), and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet.
Attach the Butterfly Frame (22) to the Right Top Frame (7) with two M8 x 8Omm Bolts (94), two M8 Washers (117), and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet.
14.Attach the Left Seat Frame (10) to the Left Base
(2) with the two indicated M8 x 75mm Carriage Bolts (84) and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet.
Attach the Left Seat Frame (10) to the Left Upright (5) with two M8 x 8Omm Bolts (94), two M8 Washers (117), and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet.
Attach the Right Seat Frame (9) to the Right Base (1) and the Right Upright (4) in the same manner.
15.Attach the Dip Arm (20) to the Rear Upright (6) with two M8 x 83mm Bolts (89), two M8 Washers (117), the Rear Upright Plate (38), and two M8 Nylon Locknuts (115). Make sure the indicated handle is horizontal.
Tighten the M8 Nylon Locknuts (115) used in steps
12 24"_
13
7
\
115
117
117 22
14117
15
2O
94
115
10
115
2
84
10